background image

TM

Quick Start Guide

(See page 8-18)

Gu

ía de inicio rápido

 (vea la página 8-18)

Operating Instructions

42”/46”/50”/54” Class 1080p Plasma HDTV

(41.6/46.0/49.9/54.1 inches measured diagonally)

Manual de instrucciones

Televisión de alta definición de 1080p y clase 42”/46”/50”/54” de Plasma

(41,6/46,0/49,9/54,1 pulgadas medidas diagonalmente)

Model No.

Número de modelo

TC-P42G10
TC-P46G10
TC-P50G10
TC-P54G10

Customer’s Record

The model number and serial number of this product can be found on its back cover. You should note this serial number in 
the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid 
in identification in the event of theft or loss, and for Warranty Service purposes.

Model 

Number 

     Serial 

Number 

   

Anotación del cliente

El modelo y el número de serie de este producto se encuentran en su panel posterior. Deberá anotarlos en el espacio 
provisto a continuación y guardar este manual, más el recibo de su compra, como prueba permanente de su adquisición, 
para que le sirva de ayuda al identificarlo en el caso de que le sea sustraído o lo pierda, y también para disponer de los 
servicios que le ofrece la garantía.

Modelo 

      Número 

de 

serie 

   

Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America

One Panasonic Way, Secaucus
New Jersey 07094 U.S.A.

Panasonic Canada Inc.

5770 Ambler Drive
Mississauga, Ontario
L4W 2T3 CANADA

©

 2009 Panasonic Corporation of North America. All Rights Reserved.

©

 2009 Panasonic Corporation of North America. Todos los Derechos Reservados.

Printed in U.S.A.

Impreso en EE.UU.

  For assistance (U.S.A./Puerto Rico), please call:

 

1-877-95-VIERA (958-4372)

  or visit us at www.panasonic.com/contactinfo 

  For assistance (Canada), please call:

 1-866-330-0014

  or visit us at www.vieraconcierge.ca

  Para solicitar ayuda (EE.UU./Puerto Rico), llame al:

 1-877-95-VIERA 

(958-4372)

  ó visítenos en www.panasonic.com/contactinfo 

TQB2AA0808-2

English

Español

Lea estas instrucciones antes de utilizar su televisor y guárdelas para consultarlas en el futuro.
Las imágenes mostradas en este manual tienen solamente fines ilustrativos.

Please read these instructions before operating your set and retain them for future reference.
The images shown in this manual are for illustrative purposes only.

(Image: TC-P50G10)

Summary of Contents for TC-P42G10




































Reviews: