65-inch Full High Definition Plasma Display
TH-65PF20ER
SMG09/30/2010
1/3
© Panasonic Corporation 2010
Product specification
(design and specification subject to change without notice)
■DISPLAY
Screen Size (Diagonal)
65-inch (1,645 mm)
Aspect ratio
16:9
Effective Display Area (WｘH )
1,434 x 806 mm
Number of pixels (HｘV)
1,920 x 1,080 pixels (1 pixel=3cells for R, G and B)
Pixel Pitch (HｘV)
0.747 x 0.747 mm
Brightness (Panel)
1,400 cd/㎡
Contrast Ratio (Bright room)
5,000,000 :1 (400:1)
Gradation
6,144 steps (equivalent)
■CONNECTION TERMINAL
VIDEO IN
BNC x 1
1.0 V [p-p] (75 Ω)
AUDIO IN (L/R)
RCA pin jack x 1 set
0.5 V [rms]
COMPONENT/RGB IN
BNC x 3
Y/G : with sync 1.0 V [p-p] (75 Ω)
B/P
B
/C
B
, R/P
R
/C
R
: 0.7 V [p-p] (75 Ω)
AUDIO IN (L/R)
RCA pin jack x 1 set
0.5 V [rms]
HDMI IN
HDMI TYPE A connector x 1
DVI-D IN
DVI-D 24pin x 1
AUDIO IN
M3 jack x 1
0.5 V [rms]
0.5 V [rms]
PC IN
MINI D-SUB 15PIN x1 (Female)
Y/G : with sync 1.0 V [p-p] (75 Ω)
Plug & Play (VESA DDC 2B)
B/P
B
/C
B
, R/P
R
/C
R
: 0.7 V [p-p] (75 Ω)
HD/VD : 1.0˜5.0 V [p-p] (high impedance)
AUDIO IN
M3 JACK x 1
SERIAL
LAN
D-SUB 9PIN x 1 (EXTERNAL CONTROL TERMINAL), RS-232C COMPATIBLE
RJ45 10BASE-T / 100BASE-TX, compatible with PJLINK
TM
Function Slot : SLOT 2.0
1 (Vacant)
■ELECTRICAL
Power Requirements
220-240 V AC, 50 Hz/60 Hz
Power Consumption
660 W
On Mode Average Power Consumption*
500 W
Power off condition
0.3 W
Stand-by condition
1.2 W (Save off), 0.7 W (Save on)
■SOUND
Audio Output
20 W [10 W + 10 W] (10 % THD)
■MECHANICAL
Dimensions (W x H x D)
1,554 × 925 × 99 mm
Carton Dimensions (W x H x D)
1,698 × 1,130× 400 mm
Weight
approx. 55.0 kg
Gross weight
approx. 69.0 kg
Cabinet Color
Black
■ENVIRONMENTAL
Operating environment
Temperature:
0 ℃ to 40 ℃
Humidity :
20 % to 80 % (Non condensation)
Altitude :
0 to 2,800 m
Storage environment
Temperature:
-20 ℃ to 60 ℃
Humidity :
20 % to 90 % (Non condensation)
Altitude :
0 to 3,300 m
■STANDARD (CERTIFICATIONS)
SAFETY REGULATIONS
EN60065 Ver.7, GOST 12.2.006-87, IEC60065
RADIATION REGULATIONS
EN55022 Class-B, EN55024 EN61000-3-2, EN61000-3-3
■REMOTE CONTROL TRANSMITTER
Power Requirements
DC 3 V (2 x R6 Size batteries)
Operation distance
approx. 7 m in front of plasma display
Weight
approx. 100 g including batteries
- Operating Instruction book - Remote Control Transmitter
- Batteries for the Remote Control Transmitter - Clamper - AC cord - Ferrite core
*Based on IEC 62087 Ed.2 measurement method.
INCLUDED ACCESSORIES
Compliance with DVI Revision 1.0
Compatible with HDCP 1.1
without sync 0.7 V [p-p] (75 Ω)
