background image

Customer’s Record

The model number and serial number of this product may be found on its rear panel. You should note this serial 

number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of 

your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.

Model Number

Serial Number

Printed in China

PBS0209H3039

Web Site: http://panasonic.net/

©

 Panasonic Corporation 2009

WARRANTY - Australia only

1. The product is warranted for 12 months from the date of purchase. Subject to the conditions of this warranty Panasonic or it’s Authorised 

Service Centre will perform necessary service on the product without charge for parts or labour if, in the opinion of Panasonic, the product is 
found to be faulty within the warranty period. 

2. This warranty only applies to Panasonic products purchased in Australia and sold by Panasonic Australia or its Authorised Distributors or Dealers 

and only where the products are used and serviced within Australia or it’s territories. Warranty cover only applies to service carried out by a 
Panasonic Authorised Service Centre and only if valid proof of purchase is presented when warranty service is requested. 

3. This warranty only applies if the product has been installed and used in accordance with the manufacturer’s recommendations (as noted in the 

operating instructions) under normal use and reasonable care (in the opinion of Panasonic). The warranty covers normal domestic use only 
and does not cover damage, malfunction or failure resulting from use of incorrect voltages, incorrect installation, accident, misuse, neglect, 
build-up of dirt or dust, abuse, maladjustment of customer controls, mains supply problems, thunderstorm activity, infestation by insects or 
vermin, tampering or repair by unauthorised persons (including unauthorised alterations), exposure to abnormally corrosive conditions or any 
foreign object or matter having entered the product. 

4. This warranty does not cover the following items unless the fault or defect existed at the time of purchase: 
  (a) Video or Audio Tapes 

(d) Cabinet Parts 

(g) Microwave Oven cook plates. 

  (b) Video or Audio Heads and Stylii resulting 

(e) User replaceable Batteries 

(h) Kneader mounting shaft unit 

     from wear and tear in normal use 

(f)  Thermal Paper, Toner/Ink Cartridges, 

(bread bakery) 

  (c) Shaver Heads or Cutters 

Drums, Developer, Film (Ink/Ribbon), 

Film Cartridge, Printer Heads 

5. If warranty service is required you should: 
  • Telephone Panasonic’s Customer Care Centre on 132600 or visit our website and use the Service Centre Locator for the name/address of 

the nearest Authorised Service Centre. 

  • Send or bring the product to a Panasonic Authorised Service Centre together with your proof of purchase receipt as a proof of purchase date. 

Please note that freight and insurance to and / or from your nearest Authorised Service Centre must be arranged by you. 

  • Note that home or pick-up/delivery service is available for the following products in the major metropolitan areas of Australia or the normal 

operating areas of the nearest Authorised Service Centres: 

 

(a) Picture tube (CRT) based Television Receivers (screen 

(b) Convection/Combination Microwave Ovens 

 

sizes greater than 66cm); Rear Projection TV’s; Plasma/LCD 

(c) Whiteboard (except portable type) 

 

televisions / displays (screen size greater than 103 cm) 

6. The warranties hereby conferred do not extend to, and exclude, any costs associated with the installation, de-installation or re-installation of a 

product, including costs related to the mounting, de-mounting or remounting of any screen, (and any other ancillary activities), delivery, 
handling, freighting, transportation or insurance of the product or any part thereof or replacement of and do not extend to, and exclude, any 
damage or loss occurring by reason of, during, associated with, or related to such installation, de-installation, re-installation or transit. 

Panasonic Authorised Service Centres are located in major metropolitan areas and most regional centres of Australia, however, coverage will vary 
dependant on product. For advice on exact Authorised Service Centre locations for your product, please telephone our Customer Care Centre on 
132600 or visit our website and use the Service Centre Locator. 
Unless otherwise specified to the consumer the benefits conferred by this express warranty are additional to all other conditions, warranties, 
guarantees, rights and remedies expressed or implied by the 

Trade Practices Act 1974

 and similar consumer protection provisions contained in 

legislation of the States and Territories and all other obligations and liabilities on the part of the manufacturer or supplier and nothing contained 
herein shall restrict or modify such rights, remedies, obligations or liabilities. 

November 2005 

THIS WARRANTY CARD AND THE PURCHASE DOCKET (OR SIMILAR PROOF OF PURCHASE) 

SHOULD BE RETAINED BY THE CUSTOMER AT ALL TIMES 

Panasonic Australia Pty. Limited

ACN 001 592 187   ABN 83 001 592 187 

Locked Bag 505, Frenchs Forest, NSW 2086 

www.panasonic.com.au 

If you require assistance regarding warranty conditions or any other enquiries,

please visit the 

Panasonic Australia

 website

www.panasonic.com.au

 or by phone on 132 600 

If phoning in, please ensure you have your operating instructions available. 

PRO-031-F01  Issue: 3.0 

 

 

23-11-2005 

Summary of Contents for TH-L32S10A





















































Reviews: