background image

VQT0K98

2

English

Important Information

For Your Safety

The power switch turns the DVD Video Camera on and off, leaving the date/time feature unaffected. If the video camera 
is to be left unattended for a long period of time, turn it off .

The DVD Video Camera and AC adaptor/charger 
have the following caution marks.

CAUTION:

 TO REDUCE THE RISK OF 

ELECTRIC SHOCK, DO NOT OPEN.

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED 

SERVICE PERSONNEL.

Precautions

WARNING:

 Many television programmes and films 

are copyrighted. In certain circumstances, copy-
right law may apply to private in-home videotaping 
of copyrighted materials.

Identifications of caution marks

This symbol warns the user that 
uninsulated voltage within the unit may 
have sufficient magnitude to cause 
electric shock. Therefore, it is 
dangerous to make any kind of contact 
with any inside part of this unit.

This symbol alerts the user that 
important literature concerning the 
operation and maintenance of this unit 
has been included. Therefore, it should 
be read carefully to avoid any problems.

WARNING:

 To prevent risk of injury or damage to 

your DVD Video Camera and the AC adaptor/
charger, use only the CGA-DU14/CGA-DU21 
battery and VSK0631 AC adaptor/charger.

WARNING : TO PREVENT FIRE OR SHOCK HAZARD, DO NOT 

EXPOSE THIS UNIT TO RAIN OR MOISTURE.

WARNING : TO PREVENT FIRE OR SHOCK HAZARD, USE THE 

RECOMMENDED ACCESSORIES ONLY.

CAUTION

RISK OF ELECTRIC 

SHOCK 

DO NOT OPEN

The liquid crystal display (LCD) panel is made by 
highly precise technology. More than 99.99% of 
its picture elements (pixels) are effective, but 
some (less than 0.01%) may appear as coloured 
bright dots. This does not indicate a fault as the 
LCD panel stretches the limits of current 
technology.

CLASS 1
LASER PRODUCT

CAUTION

This product contains a laser diode of higher 
class than 1. To ensure continued safety, do not 
remove any covers or attempt to gain access to 
the inside of the product. Refer all servicing to 
qualified personnel.

As this equipment gets hot during use, 
operate it in a well-ventilated place; do 
not install this equipment in a confined 
space such as a bookcase or similar unit.

To reduce the risk of fire, electric shock 
or product damage, do not expose this 
equipment to rain, moisture, dripping or 
splashing and ensure that no objects 
filled with liquids, such as vases, shall be 
placed on the equipment.

DVD Video Camera
• The rating plate is on the surface of the 

Video Camera.

AC Adaptor
• The rating plate is on the underside of 

the AC Adaptor.

170

ENG.book  Page 2  Tuesday, March 23, 2004  8:12 PM

Summary of Contents for VDR-M70GC












































































































































































Reviews: