CAUTION:
These servicing instructions are for use by qual-
ified service personnel only. To reduce the risk of elec-
tric shock do not perform any servicing other than that
contained in the operating instructions unless you are
qualified to do so.
• Do not attempt to disassemble the apparatus.
To prevent electric shock, do not remove screws or
covers.
There are no user-serviceable parts inside. Contact
qualified service personnel for maintenance.
• Do not strike or give a strong shock to the unit.
It may cause damage or allow water to enter the unit.
Video Input Board
Operating Instructions
Model No.
WJ-PB65C32E
CA
MERA IN
IN X-1
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
IN X-2
ALARM IN
VIDEO OUT 2
VIDEO OUT 3
VIDEO OUT 4
VIDEO OUT 1
01
23
4
5
6
789A
B
C
D
EF
Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.
PRECAUTIONS
Along with this document, refer to Matrix Switcher WJ-
SX650 Series Operating Instructions for major operating
REFERENCES
• Pay attention to static electricity
Make certain to keep boards inside the anti-static sack
until it is installed.
Put your hand on a metallic surface, other than the
boards to discharge static electricity before installation.
Do not touch components mounted on the boards
directly by hand.
Hold only both edges of the boards when installing.
controls and their functions, switch settings, and board
mounting procedure.
PREFACE
Video Input Board WJ-PB65C32E is designed for camera
input channel expansion of Matrix Switcher WJ-SX650 Series.
