background image

Before attempting to connect or install this product,  

please read these instructions carefully and save this manual for future use. 

The model number is abbreviated in some descriptions in this manual.

Operating Instructions

Included Installation Instructions

Dome Cover

Model No.

 WV-CR1S

Precautions

Mounting procedures

Refer installation work to the dealer. 

Installation work requires technique and experience. Failure to observe this may cause fire, electric 
shock, injury, or damage to the product. 
Be sure to consult the dealer. 

Read the following descriptions together with the Installation Guide of the camera. The WV-SFR631L 
is used as an example in these descriptions.

Note:

  

When a smoke type dome cover is used, the IR LED irradiation distance and the illuminance level 
for  switching  between  color  and  monochrome  are  lower  than  for  a  standard  clear  type  dome 
cover. Check the settings after attaching the enclosure.

Step1

     

Remove the enclosure 

from camera

Use  the  bit  included  with  the  camera  to  loosen 
the 2 screws that secure the enclosure, and then 
remove the enclosure from the camera body.

Note:

 

The enclosure is still connected to the cam-
era with the auxiliary wire at this stage.

Enclosure

Camera body

Enclosure 

fixing screws 

(x2)

Summary of Contents for WV-CR1S

Page 1: ...the dealer Read the following descriptions together with the Installation Guide of the camera The WV SFR631L is used as an example in these descriptions Note When a smoke type dome cover is used the IR LED irradiation distance and the illuminance level for switching between color and monochrome are lower than for a standard clear type dome cover Check the settings after attaching the enclosure Ste...

Page 2: ...er 1Remove the cover film from the outside of the dome cover WV CR1S Keep the removed cover film for future use Take care not to damage the outside or inside of the dome cover 2Attach the dome cover WV CR1S to the enclo sure When attaching align the 3 holes of the dome cover anchor bracket and 3 notches on the lightblocking sheet and dome cover with the 3 protrusions on the enclosure 3Using the 2 ...

Page 3: ...ng screws is 0 59 N m 0 44 lbf ft Refer to the Installation Guide for more information about installing the camera IMPORTANT When the enclosure is attached the camera s focus may go out of focus Use the Auto focus function in the setup menu to adjust the focus Remove the cover film after installation is complete If there are fingerprints or dirt on the dome cover wipe it clean with a soft cloth En...

Page 4: ...Newark NJ 07102 5490 Panasonic Canada Inc 5770 Ambler Drive Mississauga Ontario L4W 2T3 Canada 905 624 5010 www panasonic ca Panasonic System Networks Co Ltd 2014 For Europe and other countries Panasonic Corporation http panasonic net Importer s name and address to follow EU rules Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15 22525 Hamburg Germany PGQX1552ZA Cs0214 0 Pri...

Reviews: