background image

1

Installation Guide

AT-OME-CS31-SA-HDBT

AV Presentation 

and Collaboration System

AT-OME-CS31-SA-HDBT

The Atlona 

AT-OME-CS31-SA-HDBT

 is an AV presentation and collaboration system for 

classrooms and conference rooms. It features AV switching of remote and local sources, a mixer 

amplifier, and USB hub. 

 

The switcher has one HDBaseT® input supporting extension of HDMI, Ethernet, power, control, 

and USB 2.0 data up to 330 feet (100 meters) as well as two HDMI® inputs. Sources connected 

to these inputs, such as laptops, computers, and document cameras, are routed to the HDMI 

output connected to a projector or display. The amplifier of the OME-CS31-SA-HDBT delivers 

either two channels of 25 watts or a single channel of 50 watts into 4 or 8 ohms. It features one 

balanced stereo audio input and two unbalanced stereo audio inputs with independent level 

control for each. A balanced stereo line level output allows the mixed signal to be passed to 

an assistive listening system or separate amplifier. The OME-CS31-SA-HDBT’s USB system 

integrates a USB 2.0 host over HDBaseT with a local USB 3.0 host and connections for four 

peripheral devices such as cameras, speakerphones, interactive displays, keyboards, mice, or 

storage devices.

IMPORTANT

: Visit https://www.atlona.com/product/at-ome-cs31-sa-hdbt for the latest 

firmware updates and User Manual.

1 x AT-OME-CS31-SA-HDBT

1 x Envelope of mating connectors for all captive-screw connectors

1 x Surface mount brackets

4 x rubber feet

1 x 24 V / 5 A power supply

1 x AC cord

1 x Insert w/ QR code

Package Contents

Summary of Contents for ATLONA AT-OME-CS31-SA-HDBT








Reviews: