INSTRUCTIONS CM606
© Panduit Corp. 2012
FOR TECHNICAL SUPPORT www.panduit.com/resources/install_maintain.asp
N
ET
-A
CCESS
N-Type Network Cabinets
(Split/Hinged Side Panels - N21SPH, N22SPH, N51SPH, N52SPH)
Page 1 of 2
Split/Hinged Side Panels Installation
•
VIEW 3
Secure Bottom Support Bracket to cabinet frame with [3] M5 Torx Screws
•
VIEW 1, 2
Secure Vertical Support Bracket to cabinet frame and bottom support bracket with [1] M5 Torx Screw and [2] Hex Nuts
•
See Page 2 for Side Panel Installation Instructions
[3] M5 Torx Screws
(use T25 Torx bit)
Bottom Support Bracket
(Part of bracket cut away to
show detail)
Vertical Support Bracket
(Top)
Vertical Support Bracket
(Bottom)
[2] Hex Nuts
(use 6mm Socket
Wrench)
[1] M5 Torx Screw
(use T25 Torx bit)
VIEW 1
VIEW 2
VIEW 3
