DIGITAL CLOCK WITH BLUETOOTH SPEAKER
Models: 2PTSK1456Y0BL, 2PTSK1456N0BL, 2PTSK1456P0BL, 2PTSK1456E0BL
PRODUCT OVERVIEW
OPERATION
Power on and charging
Before first time use, charge the product using the supplied Micro USB cable.
Plug the cable into the Micro USB port on the product and the other end to a
power source. Charge for 2 hours.
Press and hold the button to turn the product on.
Setting the time
Press the button, you will hear “clock mode” prompt.
Press and hold the button until the hour number will flash on the LED display,
use the / buttons to set the hour.
Press the button and the minutes numbers will flash on the LED display, use the
/ buttons to set the minutes.
Press and hold the button to finish setting the time.
Alarm settings
Press and hold the button until lights up on the LED display.
Press and hold the button and the hours number starts blinking, use the /
buttons to set the hour.
Press the button and the minutes number starts blinking, use the / buttons
to set the minutes.
Press and hold button to finish setting the 1st alarm.
To set the 2nd alarm, press the button 4 times until the 2nd lights up on the
LED display.
Press and hold the button until the hours number starts blinking, use the /
buttons to set the hour.
Press the button and the minutes number starts blinking, use the / buttons
to set the minutes.
Press and hold button to finish setting the 2nd alarm.
To turn off an alarm, press the button until one lights off on the LED display
To turn off both alarms, press the button repeatedly until both light off on the
LED display.
Front View
8
9
10
11
12
13
14
Side View
15
16
17
18
1.
: press to adjust the brightness of the LED display.
2.
: adjust time settings.
3.
: adjust time settings.
4.
: press and hold to turn the product on.
•
When on, press to play/pause music playback.
•
Press to answer an incoming call.
•
Press again to end the call.
5.
: press to play the next song. Press and hold to increase volume level.
6.
: press to play the previous song. Press and hold to decrease volume level.
7.
(mode) : press to switch to Bluetooth mode. When on alarm mode, press to
set alarms.
8.
BT indicator: lights up when connected to a Bluetooth device.
9.
TF (Micro SD) : lights up when a Micro SD card is inserted into the TF card port.
10. LED display.
11.
(Alarm 1) : lights up when 1st alarm is set.
12.
(Alarm 2) : lights up when 2nd alarm is set.
13. AM : lights up when on AM.
14. PM : lights up when on PM.
15. AUX port: use a 3.5mm audio cable (not included) to connect to an external
audio device.
16. TF Card/Micro SD card slot: insert your Micro SD card to play the songs stored
in your Micro SD card.
17. Microphone
18. Micro USB port: use the supplied Micro USB cable to charge the product.
Top View
1
2
3
4
5
6
7
