background image

Web Store: www.parallax.com

Tutorials: learn.parallax.com

Sales: sales@parallax.com

Tech Support: support@parallax.com

Office: (916) 624-8333

Educator Hotline: (916) 701-8625

Sales: (888) 512-1024

Tech Support: (888) 997-8267

SumoBot WX Board (#32132)

The SumoBot WX board sports a socket for the Propeller FLiP Multicore Microcontroller

Module (#32123), providing power and I/O and connections to the wide array of

on-board peripheral sockets and headers. Clear labelling, status indicator LEDs, and

on-board piezospeaker support successful project building and operation.

Designed specifically for the SumoBot WX Robot Competition Kit (#32134), the board's

corner mounting holes align with the SumoBot chassis. 3-pin servo ports and an

onboard boost regulator support robot locomotion. Additional headers and sockets

accommodate sensors included in the Competition Kit, as well as optional accessories.

The WX socket accepts a Parallax WX ESP8266 WiFi - DIP module (#32420D) for

optional wireless programming and communication.

Features and Specifications

Socket for the Propeller FLiP multicore microcontroller module

Powerful onboard 5 V, 350 mA boost regulator with short-circuit and overcurrent

fault protection

WX Socket for optional wireless programming and communication with a Parallax

WX ESP8266 WiFi - DIP module

LEDs on the board for power switch position, WiFi ASC, DO and DI, and

low-battery warning

Reset button PCB resets the Propeller FLiP module

2.1mm ID center-positive DC Jack for 4.8–8.4 VDC input

Headers for 3.3V and 5V sensors, including AUX, QTI, PING, Memsic MX2125

and IR emitters/receivers

Onboard piezospeaker

Operating temperature: -4 to +185 °F (-20 to +85 °C)

PCB Dimensions: 3.07 x 3.15 in (78 x 80 mm)

Application Ideas

Build, program and battle! High-quality SumoBot Robot for the mini-sumo

competition ring

Learning robot building and programming

Compact SumoBotWX system PCB suitable for custom products

Resources and Downloads

For SumoBot WX Board documentation, software, and example programs, see the

product page: go to www.parallax.com and search #32132.

Copyright © Parallax Inc.

SumoBot WX Board  (#32132)

v1.0  8/14/2020  Page 1 of 9

Summary of Contents for 32132










Reviews: