background image

Questions, problems, missing parts? 

(8

– Friday  

 a.m. –   p.m.,  T

c

@

FOR YOUR SAFETY: 
If you smell gas:
1. Shut off gas to the appliance.

3. If odor continues, keep away from the 
appliance and immediately call your gas 

DANGER indicates an imminently 
hazardous situation which, if not avoided, 
will result in death or serious injury.

Failure to comply with the precautions 
and instructions provided with this heater 
can result in death, serious bodily injury 
and property loss or damage from hazards 

and/or carbon monoxide poisoning. Only 
persons who can understand and follow 
the instructions should use or service  
this heater.

Do not store or use gasoline or other 

vicinity of this or any other appliance.  
An LP-cylinder not connected for use  
shall not be stored in the vicinity of this 
or any other appliance.

Improper installation, adjustment, 
alteration, service or maintenance can 
cause property damage, injury or death. 
Read the installation, operation and 
maintenance instructions thoroughly 
before installing or servicing this 
equipment.

FOR OUTDOOR USE ONLY!

Keep a copy of your proof of 

which will be needed if you 
need to contact us about 
warranty coverage.

Serial No. 

Purchase Date 

, or email us

.

Model Number: 60262/61322/62969
Item Number: PH-T-107-SS / PH-T-107-MK

Summary of Contents for PH-T-107-SS















Reviews: