background image

Parasound HCA-1200 High Current Power Amplifier

Congratulations on your purchase of this precision audio component and thank you for your selection of
Parasound. Your HCA- 1200 has been designed with the latest technology to become the heart of the finest
music systems. Its high power output is matched by enormous current capacity to drive virtually any speak-
ers known. A lkVA toroid transformer and 60,000

µ

fd power supply assure power in reserve. A Class A

cascode input stage, mosfet driver stage and ultra-fast discrete AB output stage assure flawless reproduc-
tion.  You have made an excellent choice.

Please take a few moments now to read these instructions thoroughly so you may fully understand the
sophisticated capabilities of your new power amplifier.

Unpacking

Save your carton and the styrafoam inserts for future safe transportation in case you move or the unit ever
requires shipping for repair. Note, the actual printed carton is not itself strong enough for safe shipping, so
you must place it into an additional outer 'overcarton' before shipment.

Before you proceed, find the serial number which is located on the rear panel of the unit and note it here for
future reference or in case the unit is ever stolen ____________________.

  O     W       N      E      R    ‘     S              M      A      N     U      A      L

Summary of Contents for HCA-1200









Reviews: