INSTALLATION GUIDE
DUAL-HEAD MULTI-DIRECTIONAL LED WORK LIGHT
CAUTION:
Read all instructions and warnings before operating! SAVE THESE INSTRUCTIONS!
WARNING:
To avoid serious injury or death from electrical shock or fire:
1.
DO NOT handle this fixture or try to plug it in when your hands are wet or damp or when standing on a wet or damp surface or in water.
2.
This fixture MUST ALWAYS BE USED in accordance with all electrical and safety codes and ordinances, including the most recent National Electric Code
(NEC) and with the Occupational Safety and Health Administration (OSHA) Volume 1 on General Industry Standards and interpretations.
3.
ALWAYS make certain that the power source conforms to the rating on the fixture.
4.
ALWAYS disconnect the power before servicing or inspecting the fixture for any reason.
5.
This fixture IS ONLY FOR USE ON 110-120V and is equipped with an approved 3 conductor cord with a 3-prong, grounded plug. TO REDUCE THE RISK OF
ELECTRICAL SHOCK, it should only be plugged into a properly grounded 3-prong outlet.
6.
This fixture is suitable for indoor/outdoor use. The fixture can be used outdoor in rain or damp conditions.
7.
CAUTION: RISK OF ELECTRIC SHOCK. Do not use in or near standing water, or where water may accumulate. Keep this fixture at least 16 feet from pools
or spas. Keep plug dry. DO NOT IMMERSE THIS FIXTURE.
8.
Ground Fault Circuit lnterrupter (GFCI) should be provided on the circuit or outlet to be used in a wet location or outdoor use.
9.
This fixture is not explosive-proof. DO NOT use in potentially dangerous locations, such as in flammable or explosive atmospheres.
10. Always keep the work light away from any flammable surface or materials.
11. NEVER operate the light with the clear protective glass broken or removed.
12.
NEVER LOOK DIRECTLY INTO LIGHT SOURCE. LEDs are extremely bright and can damage eyes with prolonged exposure.
13.
KEEP AWAY from heating vents, radiators, or other sources of heat.
14.
KEEP OUT OF REACH OF CHILDREN.
15.
Always check damaged or worn-out parts before using the work light.
16. Do not use a pressure washer to clean this product.
17. Do not modify the work light in any way.
info@parmida.com www.parmida.com
PLED-DHWL100W-OR | PLED-DHWL50W-OR
