background image

Thank you for purchasing this quality product. To ensure correct function and safety, please read and save all 
instructions before using the product

To avoid possible electric shock, turn off the electricity at the main fuse box or circuit panel before you begin the fan installation or 
before servicing the fan or installing accessories.

Read all instructions and safety information carefully before installing your fan and save these instructions.

Make sure all electrical connections comply with local codes or ordinances and the National Electrical Code. If you are unfamiliar with 
electric wiring, please use a quali

ed and licensed electrician.

Make sure you have a location selected for your fan that allow clear space for the blades to rotate,and at least seven (7) feet of clearance betweem 
the floor and

 

the fan blade tips. The fan should be mounted at leaet thirty (30) inches ftom walls or other upright structures.

WARNING: The outlet box and ceiling support joist used must be securely mounted, and capable of supporting at least 100 pounds

.

 To 

reduce the risk o

f fi

re, electric shock or personal injury, mount to the outlet box marked acceptable for fan supported and use mounting 

screws provided with the outlet box. The box must be supported directly by the building structure.

WARNING: To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked “acceptable for fan support” and use mounting

screws provided with the outlet box most outlet boxes commonly used for the support of lightin

g fi

xtures are not acceptable for fan 

support and may need to be replaced. Consult a quali

ed electrician if in doubt.

Electrical diagrams are for reference only. Light kits that are not packed with the fan must UL listed and marked suitable for use with the 
model fan you are installing. Switches must be UL. general use switches. Refer to the instructions packaged with the light kits and 
switches for proper assembly.

After installation is complete, check that all connections are absolutely secure.

After making electrical connections, spliced conductors should be turned upward and pushed carefully up into outlet box. The wires 
should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box.

WARNING: To reduce the risk of electrical shock an

d fi

re, do not use this fan with any solid-state fan speed control device, or rheostat.

Do not separate the reverse switch until the fan has come to a complete stop.

Do not insert anything into the fan blades while they are rotating.

WARNING: To reduce the risk of personal injury, do not bend the blade brackets (also referred to a

s “fl

anges

) during assembly or after 

installation. Do not insert objects in the path of the blades.

To avoid personal injury or damsge to the fan and other items,be cautious when working around or cleaning the fan.

Do not use water or detergent when cleaning the fan or fan blades. A dry dust cloth or lightly dampened cloth will be suitable for most cleaning.

1. 

2. 

3. 

5. 

6. 

7. 

8. 

9. 

10. 

11. 

12. 

13. 

14. 

15. 

NOTE: The important safety precautions and instructions appearing in the manual are not meant to cover all possible conditions and situations that may
may

 

occur. It must be understood that common sense and caution are necessary factors in the nstallation and operation and operation of this fan.

NOTE: This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities are 
different or are impaired, or lack of experience or knowledge, unless such persons are supervised or trained to operate the appliance 
by a person responsible for their safety.

NOTE: Children should be supervised to ensure that they do not use appliances as a toy.

THANK YOU FOR YOUR PURCHASE

SAFETY TIP

4. 

F3502Q110V/F3502BK110V
F3502WH110V

Installation & Operating Instructions for the

Parrotuncle Owner's Installation ,Manual

WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER

Summary of Contents for F3502BK110V

















Reviews: