background image

Instruction Sheet
for the PASCO
Model ES-9047

012-01525B

10/91
$1.00

Introduction

The PASCO Model ES-9047 Tapered Cylinder and
Plate contains an interesting shape for charge distribu-
tion demonstrations. The tapered conductive cylinder
measures 13 cm high, 6 cm in diameter at the base and
10 cm in diameter at the top. It is attached to a 25 cm
diameter plate by a plastic insulator. Terminals are
provided for electrical connection to both surfaces, the
cylinder and the plate.

Equipmemt Included:

• Cylinder

• Plate

• Insulating Spacer

• 6-32 Nylon Machine Screw

• 6-32 Hex Nut

Additional Equipment  Recommended for Use with
the Tapered Cylinder and Plate:

• Power Supply ES-9049A

• Electrometer ES-9054B

• Faraday Ice Pail and Shield ES-9058

• Charge Producers and Proof Plane ES-9057

TAPERED CYLINDER AND PLATE

Assembly Procedure

To assemble your Tapered Cylinder and Plate:

Push the nylon machine screw from beneath
through the center-hole in the  the plate.

Slide the insulating spacer over the screw.

Position the tapered cylinder over the insulated
spacer.

Tighten the hex nut over the screw to hold the
assembly.

scientific

Tapered cylinder

6-32 Hex nut

Plate

Insulating spacer

6-32 Nylon machine screw

Reviews: