background image

1

、Welcome

Please go through this user manual carefully before operating.

2、R

eady

 

to

 S

tart

The shell of this Dry Ice Temperature Data Logger is made of special alloy material, which has 
the advantages of high mechanical strength, low temperature resistance, environmental 
protection, non-toxic, wear resistance and corrosion resistance. It's very suitable for ultra-low 
temperature refrigeration and cold chain transportation.
After finishing the logging, the user only needs to connect the instrument to a computer to 
automatically generate an encrypted PDF report. The information showed in the PDF report 
includes record summary, statistics, alarm information, charts, et.

User Manual

Data Logger

PCE-LTD 100

7、S

top

 R

ecording

 

and

 V

iewing

 D

ata

1. The data logger will stop recording when memory is full or connecting with a computer.
2. Plug the data logger into an available USB port on a PC, When a data report is being 
generated the LED light will flash. The LED light will stop flashing and keep on after 
generating a data report. It may need several seconds (According to logged readings) to 
finish. Do not unplug data logger at this time. The time required to generate report is 
determined by amount of data generated. Please wait patiently about 10s.

 

When the LED 

lamp stops flashing and keeps on, it indicates that record report has been generated. Users 
can view or copy generated record report on PC.
3. User can also use PC software to view and analyze the data.

8、LED I

ndication

1. After finishing configuration and plug out the data logger, LED light will flash. LED light 
begins to flash. When logging, the LED will flash once every 5s. When not logging, the LED 
will flash twice every 5s. The flashing time is 3 minutes, and within 3 minutes, if temperature 
exceeds the range of -20~60

, data logger will still work normally, but LED light will go out 

immediately.
2. Plug the data logger into an available USB port on a PC after finishing recording, and data 
logger will automatically generate record report. In the process of generating the record 
report, LED flashes every 1s.

 

After recording report is generated, the LED light will stop 

flashing and stay on.  

3、B

attery

 I

nstallation

The standard batteries of this product is 3.6V 2/3 AA battery. Users can purchase batteries 
from our company or dealers. 
Please refer to the following 

 for battery installation:   

instruction

5

、S

etup

 

and

 S

tart

1. Make sure the data logger has been connected to PC USB port

.

2.

.

 

Double click PoChain software

3.

 

 

 

Click Configure to enter configuration interface. If the configuration interface displays 

"

"

the serial number of the data logger, it indicates that the connection between the device and 
the PC is successful

.

4. In configuration

 

interface, customer can configure the file format, start time, start delay 

time, recording interval, time zone, report title, multi-point calibration, and access password.

 

customer can also set the alarm limit, alarm type, alarm delay time and temperature units. 
Click the

 

Configure

 

to complete the configuration

.

"

"

5.

 

 After finishing configuration, Plug out the data logger. After tightening the lid, 

4、S

oftware

 I

nstallation

The PC software used in this recorder can be downloaded from the official website of our 
company or obtained from the distributor.
D

 

 

 

 

ouble click PoChain.exe", then click Next when you see Welcome to the PoChain setup 

"

"

"

"

 

 

 

wizard", until the Completing the PoChain setup wizard dialog box appears, click Finish

"

"

"

"

to complete installation.

 

 

 

6、S

oftware

 

Configuration

1. Channel: Single channel.
2. Parameter: Temperature.
3. High and Low Limit: To set high and low limit and violation events will happen when 
exceeding the set data

.

4. Accumulation: If unselected, it will be single-type, and alarm will happen after set alarm 
delay. And if limit violation events removed before this delay, alarm won't happen. If selected, 
it will be accumulation-type, alarm will happen when the total time of the violation events 
exceeds the set alarm delay.
5.

 

Alarm Delay

:

 When limit violation events happen, alarm will happen after the set alarm 

delay time.
6. Units: 

/

 To choose between Centigrade and Fahrenheit temperature

.

7. External probe: This data logger only supports internal temperature probe

.

8. File format: The data logger supports to generate pdf, dlg (raw  le), csv, xls or txt directly, 

 

fi

fi

and user can select the  le type that will be generated, dlg files can be opened and analyzed 
with professional software provided by us.
9.

 

Start time: Set when the data logger starts recording

.

10. Start delay: This decide start time actually. Data logger will start after the start delay time.
11. Recording interval: Time interval for recording data.
12. Time and Zone: The software automatically updates the time according to the time of the 
computer used by the user. User can set time zone according to user's country or region.
13. Change report information: User can modify report title, trip No., and trip description.
14. Password: User can set password for current logger. Once password set, user must input 
right password to access

.

15. Calibration: This operation affects actual measurement accuracy of data logger. For 

2

3

1

place data logger in the specific work environment. The data logger will start 
recording according to user's settings.

  

 

   

professional users, this function can be used to recalibrate. Non-professional users must 
operate this function under the guidance. Please consult your local distributor for details

.

16. Configurate: After finishing all settings, click this option to complete configuration.

PCE Americas Inc.

1201 Jupiter Park Drive  

Suite 8 

Jupiter

FL-33458

USA

From outside US: +1

Tel: (561) 320-9162

Fax: (561) 320-9176

info@pce-americas.com

www.pce-instruments.com/english

www.pce-instruments.com

PCE Instruments UK Ltd.

Unit 11 

Southpoint Business Park 

Ensign way

Hampshire / Southampton

United Kingdom, SO31 4RF

From outside UK: +44

Tel: (0) 2380 98703 0

Fax: (0) 2380 98703 9

info@pce-instruments.co.uk

Reviews: