www.smokemachines.net
Fog Cooler
Introduction
Thank you for choosing the Pea Soup Fog Cooler. You now own a rugged and powerful state-of-the-
art machine. Prior to use, we suggest that you carefully read all of the instructions. By
following the suggestions found in this user manual, you can look forward to the reliable and
satisfactory performance of your Fog Cooler for years to come.
Please follow these operation, safety and maintenance instructions to ensure a long
and safe life for your fog cooler.
Pay attention to all warning labels and instructions printed on the exterior of your Fog Cooler
Ideal operating temperature is 10 - 30 degrees Celsius.
After moving or transporting this unit, wait 5 minutes before operating.
Input fog must be clean. Contaminated fog may damage internal parts.
There must be a free air space of at least 15cm (6 inches) between the fog machine output and
the fog cooler intake.
After interrupting operation, wait 3 minutes before starting again.
Keep this device dry.
For inside use only. Not designed for outside use.
Keep fog cooler upright. Do not tilt this device. Angle of inclination may not exceed 10 degrees.
Turn off or unplug when not in use.
This machine is not water or splash-proof. If moisture, water, or fog liquid gets inside the
housing, immediately unplug the unit and contact a service technician or Pea Soup before using
it again.
No user serviceable parts inside. Refer to Pea Soup or other qualified service personnel.
For adult use only. Fog cooler must be installed out of the reach of children. Never leave the
unit running unattended.
Locate the fog cooler in a well-ventilated area. Never cover the unit’s vents. The fog cooler is
best installed 1 metre away from all objects.
If ducting the fog, remember that heavy fog acts like water and will flow back to the lowest point
in the ducting hose. Make sure that the fog cooler’s outlet is higher otherwise fog will flow back
into the cooler and cause condensation.
If using an Antari fog machine with the cooler, use only FLR Fog Liquid, designed to disperse
quickly before rising. Contact Pea Soup for supplies.
If your Fog Cooler fails to work properly, discontinue use immediately. Contact Pea Soup for
service.
Unpacking & Inspection
Open the shipping carton and verify that all equipment necessary to operate the system has arrived
intact. Refer to the “Features” section for information on what items are included with your model.
If any equipment is missing contact Pea Soup immediately.
Before beginning initial setup of your Fog Cooler, make sure that there is no evident
damage caused by transportation. In the event that the unit’s housing or cable is damaged, do not
plug it in and do not attempt to use it until after contacting Pea Soup for assistance.
