Pearl H-1050 Instruction Manual Download

Page: 1 / 4

Hi-Hat Clutch

Felt Washer
Hi-Hat Cup

TractionPlate

w/Traction Grips

Reversible Spiked / Rubber

Tipped Feet

Spring Tension Adjustment Dial

Base

Upper Tube

Upper Pull Rod

Die-Cast Joint

StopLock

Wing Bolt

Adjustment Ring

(for Footboard Angle)

Toe Stopper

Radius Rod

H-1050

Instruction Manual

Congratulations on your purchase!

To get optimum performance of your H-1050 Hi-Hat Stand,

please read this Instruction Manual before playing.

PEARL HI-HAT STAND

Summary of Contents for H-1050

Page 1: ...justment Dial Base Upper Tube Upper Pull Rod Die Cast Joint StopLock Wing Bolt Adjustment Ring for Footboard Angle Toe Stopper Radius Rod H 1050 Instruction Manual Congratulations on your purchase To...

Page 2: ...ie Cast Joint as shown in Fig 3 A and tighten securely Insert the Upper Tube into the Die Cast Joint and set the height to your preference then tighten the Wing Nut Set the Stop Lock by loosening the...

Page 3: ...Tip The Spikes are sharp and can cause serious personal or property injury To prevent mishaps use extreme care when handling the stand especially when the Spike Tips are exposed A rug or carpet should...

Page 4: ...ange without notice Printed in China 1601 Support Casting Allen Screw CAUTION Periodically check all Allen Screws for tightness and tighten them with the provided hexagonal wrench as needed Periodical...