background image

SPECS

P   E   A   V   E   Y     E   L   E   C   T   R   O   N   I   C   S

SP

 3G

Sound Reinforcement
Enclosure with
Sound Guard

 HF

Protection System

SPECIFICATIONS

Frequency Response, 1 Meter
On-Axis, Swept-Sine in Anechoic
Environment:

54 Hz to 17 kHz

Low-Frequency Cut-Off (-3 dB point):

54 Hz

Usable Low-Frequency Limit
(-10 dB point):

47 Hz

Power Handling:

Full-Range:
   350 W continuous (52.9V RMS)
   700 W program
   1,400 W peak

Bi-amp Low:
   350 W continuous (52.9 V RMS)
   700 W program
   1,400 W peak

Bi-amp High:
   150 W continuous (34.6 V RMS)
   300 W program
   600 W peak

Sound Pressure Level, 1 Watt, 1
Meter in Anechoic Environment:

Full-Range:

99 dB (2.8 V)

Bi-amp Low:

100 dB (2.8 V)

Bi-amp High:

99 dB (2.8 V)

Maximum Sound Pressure Level
(1 meter):

Full-Range:
   125 dB continuous
   131 dB peak

Bi-amp Low:
   126 dB continuous
   132 dB peak

Bi-amp High:
   120 dB continuous
   127 dB peak

Radiation Angle Measured at -6 dB
Point of Polar Response:

500 Hz to 1.6 kHz:
   Horizontal:  122

°

 

±

-15

°

   Vertical:      152

°

 

±

-38

°

1.6 kHz to 5 kHz:
   Horizontal:  79

°

 

±

21

°

   Vertical:      83

°

 

±

22

°

5 kHz to 16 kHz:
   Horizontal:  87

°

 

±

10

°

   Vertical:      45

°

 

±

4

°

Directivity Factor, Q (Mean):

8  

±

4.3

Directivity Index, Di (Mean):

8.3 dB  

±

2.8 dB

Transducer Complement:

1505-8 KADT Black Widow

® 

woofer

6.5" Pro mid-range driver
22XT compression driver

Box Tuning Frequency:

58 Hz

Crossover Frequency (internal
passive):

800 Hz

Minimum Recommended Active
Crossover Frequency and Slope for
Bi-amping:

800 Hz at 18 dB/octave

Time Offset:

0.14 mS (delay Lows)

Impedance (Z):

Full-Range Nominal:

Full-Range Minimum:

5.3 

Lows Nominal:

Highs Nominal:

Input Connections:

Two paralleled 1/4" phone jacks for

full-range

One 1/4" phone jack for bi-amp low
One 1/4" phone jack for high and mid bi-

amp

Enclosure Materials & Finish:

3/4" plywood enclosure covered with black

carpet and protective polymer corners

Expanded metal grille to protect the mid

and low drivers

Mounting Provisions:

One SA-1 stand mount on bottom of

enclosure.

Dimensions (H x W x D):

33.50" x 21.50" x 22.50"
(85.1 cm x 54.6 cm x 57.1 cm)
Rear width 14.25" (36.1 cm)

®

Summary of Contents for SP 3G

Page 1: ...o 1 6 kHz Horizontal 122 15 Vertical 152 38 1 6 kHz to 5 kHz Horizontal 79 21 Vertical 83 22 5 kHz to 16 kHz Horizontal 87 10 Vertical 45 4 Directivity Factor Q Mean 8 4 3 Directivity Index Di Mean 8 3 dB 2 8 dB Transducer Complement 1505 8 KADT Black Widow woofer 6 5 Pro mid range driver 22XT compression driver Box Tuning Frequency 58 Hz Crossover Frequency internal passive 800 Hz Minimum Recomme...

Page 2: ...also a part of the unit to provide added protection to the enclosure A powder coated expanded metal grille covers the lower part of the front of the enclosure to protect the mid and low frequency drivers from unforeseen accidents Sound Guard Peavey s propri etary circuit for high frequency driver protection has been included as a integral part of the crossover for the SP 3G The input signal is rou...

Page 3: ...lotted on ISO 1 octave centers from 500 Hz to 16 kHz VERTICAL POLAR PATTERNS 0 o 30 o 60 o 90 o 30 o 60 o 90 o 0 o 30 o 60 o 90 o 30 o 60 o 90 o 0 o 30 o 60 o 90 o 30 o 60 o 90 o 0 o 30 o 60 o 90 o 30 o 60 o 90 o 90 o 60 o 30 o 0 o 30 o 60 o 90 o 90 o 60 o 30 o 0 o 30 o 60 o 90 o 90 o 60 o 30 o 0 o 30 o 60 o 90 o 16 kHz 8 kHz 4 kHz 500 Hz 2 kHz 1 kHz 0 o 30 o 60 o 90 o 30 o 60 o 90 o 4 kHz 8 kHz 0...

Page 4: ...ard 2 1984 utilizing audio band limited 20 Hz 20 kHz pink noise with peaks over four times the RMS level This strenuous test signal assures the user that every portion of this system can withstand today s high technology music The test signal contains large amounts of very low frequency energy effectively simulating the frequency content of live music situations The full measure of high frequencie...

Reviews: