90PUNTPI11 – 90PUNTPI12 – 90PUNTPI13 – 90PUNTPI21 – 90PUNTPI22 – 90PUNTPI23
- 13 -
EN
INDEX
1.
GENERAL INSTRUCTIONS
1.1
Manufacturer and welding machine identification data
1.2
General safety warnings
1.3
Prevention measures to be taken by the user
1.4
Technical data
1.5
Intended and non intended use
1.6
Description of the product and how it works
2.
INSTALLATION INSTRUCTIONS
2.1
Environmental conditions
2.2
Energy requirement
2.3
Connection to the energy sources
2.4
Transporting, storage and assembly information
3.
INSTRUCTIONS FOR THE OPERATOR
3.1
Description of the functions
3.2
Guide to starting the welding machine for the first time
3.3
Getting ready to weld
3.4
Influence of the different welding parameters
3.5
Checking spot quality
3.6
Operating guide
3.6.1
Operating guide for autobody repair works
3.7
Description of the welding control unit
3.8
How to eliminate welding defects
4.
MAINTENANCE INSTRUCTIONS
4.1
Maintenance information
4.2
Guide to maintenance
1.
GENERAL INSTRUCTIONS
1.1
MANUFACTURER AND WELDING MACHINE IDENTIFICATION DATA
Manufacturer data
P.E.I.-POINT SRL
Via Martin Piva, 34
35010 Limena / Padova / Italy
Tel. +39 049 8840695 / 8848052 Fax +39 049 8841129 e-mail:
Welding machine data
Resistance type welding machine; see the data plate on the machine and the certificate of conformity attached to this manual for
the model, serial number and year of construction.
Introduction
This manual contains the information needed to install, use and service your welding machine.
Follow the instructions to get the best out of your welding machine, in the most economical way and in complete safety.
