Part Number: 803V0102
© 2012 Pella Corporation
INSTALLATION INSTRUCTIONS
IMPERVIA
®
SLIDING PATIO DOOR WITH FINS
Installation Instructions for Typical Wood Frame Construction.
These instructions were developed and tested for use with typical wood frame wall construction in
a wall system designed to manage water.
These instructions are not to be used with any other
construction method.
Installation instructions for use with other construction methods or multiple
units may be obtained from Pella Corporation or a local Pella retailer. Building designs, construction
methods, building materials, and site conditions unique to your project may require an installation
method different from these instructions and additional care. Determining the appropriate
installation method is the responsibility of you, your architect, or construction professional.
Sill Flashing Tape #2
Sill Flashing Tape #1
Water Resistive Barrier
Sheathing
Framing
Nailing Fin
Sill Support
Top
Flashing
Tape
Fin
Corner
Door Top
Door Bottom
Side
Flashing
Tape
Interlocker
Side
Flashing
Tape
Corner
Flashing
Tape
Corner
Flashing
Tape
REMEMBER TO USE APPROPRIATE PERSONAL PROTECTIVE EQUIPMENT
Always read the Pella Impervia Limited Warranty before purchasing or installing
Pella Impervia products. By installing this product, you are acknowledging that this Limited
Warranty is part of the terms of the sale. Failure to comply with all Pella Impervia installation and
maintenance instructions may void your Pella Impervia product warranty. See Limited Warranty
for complete details on
http://warranty.pellaimpervia.com.
