background image

Installation Instructions for Typical Wood Frame Construction.

These instructions were developed and tested for use with typical wood frame wall construction in 
a wall system designed to manage water. 

These instructions are not to be used with any other 

construction method.

 Installation instructions for use with other construction methods may be 

obtained from Pella

®

 Corporation or a local Pella retailer. Building designs, construction methods, 

building materials, and site conditions unique to your project may require an installation method 
different from these instructions and additional care. Determining the appropriate installation method 
is the responsibility of you, your architect, or construction professional. 

Handling and Storage:

Provide full support under the framework while storing, moving and installing this product. DO 
NOT lift the product by the head member only. Remove the plastic shipping material prior to storing 
or installing the product. DO NOT store in direct sunlight. Allow sufficient spacing between products 
for ventilation.

REMEMBER TO USE APPROPRIATE  

PERSONAL PROTECTIVE EQUIPMENT.

Always read the Vinyl Window and Door Limited Warranty before purchasing or 

installing Vinyl Windows and Doors manufactured by Pella Corporation. By installing this product, 
you are acknowledging that this Limited Warranty is part of the terms of the sale. Failure to comply 
with all Pella installation and maintenance instructions may void your Pella product warranty. See 
Limited Warranty for complete details at 

http://warranty.pella.com

.

INSTALLATION INSTRUCTION - INSTRUCCIONES DE INSTALACION

FOR DOUBLE-HUNG VENT REPLACEMENT WINDOW

Part Number: V784840

©Pella Corporation 2007

Vinyl Windows and Doors

Manufactured by Pella Corporation

Lea las instrucciones en español en el reverso.

*OUFSJPS

%SZXBMM

&YJTUJOHXBMM

DPOTUSVDUJPO

&YJTUJOH

XJOEPX

GSBNF

*OTVMBUJPO

'SBNJOH

$IFDLSBJM

YOU WILL NEED TO SUPPLY:

TOOLS REQUIRED:

s#EDAROR)MPERVIOUSSHIMSSPACERSTO 
sXSHEETMETALSCREWSFORHEADEXPANDER 
s'REAT3TUFF

 Window and Door Insulating Foam  

Sealant by the Dow Chemical Company or equivalent  

LOWPRESSUREPOLYURETHANEWINDOWANDDOORFOAM

 

$/./4USEHIGHPRESSUREORLATEXFOAMS

s(IGHQUALITYEXTERIORGRADEPOLYURETHANEOR

 

SILICONESEALANTTUBEPERWINDOW 

s,OOSElLLlBERGLASSINSULATION

s4APEMEASURE
s,EVEL
s(AMMER
s5TILITYKNIFE
s0UTTYKNIFE
s0RYBAR
s3CREWDRIVER

&LAT0HILLIPS 

s3IDECUTTERS
s$RILLWITHvDRILLBIT
s3EALANTGUN

Installation will require two or 

more persons for safety reasons.

&OR(IGH0ERFORMANCE)NSTALLATIONSONLY
sXmATHEADCORROSIONRESISTANTWOODSCREWS
sXPINEFORINTERIORFRAMESTOPS

SEALANT

SEALANT

Summary of Contents for V784840








Reviews: