background image

FOODSERVICE

EVERPURE

®

 CONSERV

®

 LT

-

S HIGH EFFICIENCY RO SYSTEM INSTALLATION AND OPERATION GUIDE

INTRODUCTION

The Everpure Conserv LT-S Processor is a pre-assembled solution designed to provide high purity water for steam 

applications. It combines a number of water treatment technologies into one easy-to-install package. The Processor provides 

reduction of sediment. It also limits corrosion* and scale* by reducing TDS, chlorine* and chloramines*.

INSPECTION

Before mounting the Conserv LT-S Processor, inspect the parts. Use the table and illustration provided to verify the 

parts provided. If any parts are missing, contact Customer Service at 800.942.1153 (US only)/630.307.3000 or by email at 

CSeverpure@pentair.com.

Parts

1.  Wall Unit with GRO-75EN RO Membrane, 

Cartridge in Place

2.  4CC Mineral Cartridge
3.  4FC5 Filter Cartridge
4.  Storage Tank
5.  Parts Bag Containing: 

Bypass Plug 

Red Tubing with Connecting Elbow 

Power Cord 

Blue Tubing 

Angled Ball Valve 

Ball Valve 

TDS Meter 

White Tubing

Conserv LT-S

EV9975-20

EVERPURE

®

 

CONSERV

®

 LT

-

S HIGH EFFICIENCY REVERSE OSMOSIS (RO) PROCESSOR

1

2

4

3

5

* Not performance tested or certified by NSF

®

Summary of Contents for EVERPURE CONSERV LT-S





















Reviews: