perco.com linkedin.com/mwlite/company/perco export@perco.com +7 (812) 247-04-64
RTD-20 full height double rotor turnstile is a doubled version of RTD-16 full height rotor turnstile
i.e. it features two passage lanes. This turnstile allows saving more than 25% of the passageway
width compared with two RTD-16 turnstiles installed in a row.
Turnstile is available in two versions:
•
RTD-20.1 – with the motor drive of automatic resetting
•
RTD-20.2 – with the mechanical drive of resetting
RTD-20.1S and RTD-20.2S turnstiles are equipped with a stainless steel rotor.
Two RC-panels are included in the standard delivery set, one for each passage zone. Buttons
orientation relative to the passage directions is to be set upon connecting the RC-panel to the
RTD-20 Full height rotor turnstile
Application
RC-panel
turnstile.
It is recommended to install one turnstile based on a maximum
working load of 20 persons/min. Turnstiles can be equipped with
a matching gate and railings.
Each passage zone provides passage control in two directions, operating mode may be
set independently for each passage direction of both passage zones. Supported operating
modes:
•
passage denial in both directions
•
single passage in one direction and passage denial in the other direction
•
successive single passage in both directions
•
free passage in one direction and passage denial in the other direction
•
free passage in one direction and single passage in the other direction
•
free passage in both directions
•
lock-chamber mode (two-step mode with a pass-through verification, set during
installation)
The product is a normally closed device. When de-energized, the rotor is locked in its home
position.
Operating modes
+55
-40
22-30V
operating
voltage
temperature
range
40
persons/min
mechanical
unlocking
2
passage
direction
motor drive
210
W
W
power
consumption
