AMKUS CUTTER KIT P/N K5022 INSTALLATION INSTRUCTIONS
P
ERFORMANCE
A
DVANTAGE
C
OMPANY 10-2013
CAUTION
To avoid the risk of personal injury, property damage or product damage, please use the included
fasteners for mounting.
* The bracket must be securely mounted to a stable surface and material.
* When mounting bracket to PAC TRAC aluminum products
P/N 7000
,
P/N 7020
,
P/N 7040
,
P/N 7050
with the included Trac Lok inserts
P/N 7016,
torque the screws to a maximum 15 in-lbs.
* PAC recommends regular and frequent inspections to be certain of proper operation and installation.
For additional assistance call 888-514-0083 between 8AM-5PM EST or email: info@pactoolmounts.com
INS-K5022
www.pactoolmounts.com
P/N 2069LN
FIGURE 1
(Thru Mounting Method)
P/N 2031
P/N 2069LN
6-5/8”
17/64”
HOLES (2)
P/N 2038(2)
10”
17/64” DIA. (2)
ADJUSTAMOUNT ATTACHMENT
(See INS-1006 for more installation information)
STANDARD MTG. HARDWARE QTY
¼-20
Nylon Locking Nut
2
2
PAC Fastener Packet P/N 2035
P/N 2038
P/N 2069LN
¼-20 x 1
S.S. Hex Head Screw
STANDARD MTG. HARDWARE QTY
¼-20
Nylon Locking Nut
3
3
PAC Fastener Packet P/N 2033
P/N 2031
P/N 2069LN
¼-20 x 1
S.S. Flat Head Screw
1-1/2”