background image

®

C

US

E237800

LISTED

3 IN. BENCH GRINDER

On occasion, after printing of our literature is completed, our manufacturers may make changes and/or modifications to merchandise 

which will not be reflected in this manual. Although we strive to maintain complete and accurate information, it is possible in some 

instances, that the product may differ slightly from printed specifications. Illustrations are intended for reference only.  Actual merchandise 

may vary. Wilmar is not responsible for typographical errors.

Please read these instructions carefully and retain them for future use.

OWNERS MANUAL

Item Number W50003

     WARNING!

READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS AND WARNINGS BEFORE OPERATING THIS TOOL. FAILURE TO DO SO 
MAY RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE AND WILL VOID WARRANTY.

Some dust created by power sanding contains chemicals  known to the State of California to cause cancer, birth defects or other  reproductive harm. An example of 

this type of chemical is lead from lead based  paints, Crystalline Silica from bricks and cement or other masonry, Arsenic and Chromium from chemically treated lumber. 

Your risk from these exposures varies, depending  on how often  you do this type of work. To reduce your exposure: work in a well ventilated area and work with 

approved safety equipment, such as dusk masks that are  specially designed to filter out microscopic  particles.

Summary of Contents for W50003







Reviews: