background image

Thank you for purchasing a ViewPoint

Single Pro light system. All ViewPoint

light systems are constructed of the highest quality materials, such as cold-
forged aluminum housings, heavy duty cords with strong positive-click connec-
tions, and halogen bulbs with dichoric glass reflectors. Your ViewPoint

Single

Pro light system produces a clean light pattern for optimum visibility and is 
easily recharged for continued night riding enjoyment.

Please save these instructions, as they contain important information for 
taking care of your ViewPoint

light.  

Installation and Use

Note: 

Be sure to fully charge battery before first use (see the following section

for details).

The helmet mount strap secures the light to your helmet through its 

ventilation holes.

1. Place the light, mounted in its base, approximately a third of the way 

from the front of your helmet (see Figure 1).  

2. Feed the strap down through one hole and up through another until it

meets the "D" ring (see Figure 2).

Bulb Replacement – Read Carefully!

Take care when replacing the lamp in order not to damage the bulb connection.

1. Disconnect headlamp from battery pack.

2. To remove the bulb, carefully unthread the lens cap. Do not allow the bulb

to rotate. It may be necessary to press down gently on the bulb while
unthreading the cap.

3. Unplug the used bulb and discard it.

4. To install the bulb, first insert the two prongs of the retainer clip into the

larger holes on the ceramic socket. Next, insert the bulb lead wires into the
smaller holes in the socket.

5. Rethread lens cap onto housing. Make sure the lens cap thread is fully

engaged with the housing. Do not plug the lamp into the battery until after
this step is complete.

Performance, Inc.

One Performance Way

Chapel Hill, NC 27514

www.performancebike.com

1-800-727-2453

®

SinglePro

Base

Allen Head Bolt

Phillips Head Screw

Bulb

Lens Cap

Housing

Assembly

Ceramic Socket

Bulb Retainer Clip

Exploded View

For technical support, call 1-800-727-2453 from 9am - 6pm Monday through Friday.

Helmet

Mount

Owner’s Manual

Reviews: