background image

Loosen

Lift

Tighten

Phillips Screwdriver

UNPACKING INSTRUCTIONS AND IMPORTANT SAFETY INFORMATION

x 2

04

x 2

01

Base

90 Degree Plate

 

STEP 1 

Attach the nails or rubber pads to the base feet

STEP 2A 

Fasten the post assemblies to the bases(for regular lower height)

STEP 2B 

Fasten the post extensions and post assemblies to the bases(for 

extra higher height)

1

2

3

03

02

x 2

x 2

 x 2

03

05

06

Post Assembly

x 2

02

Post Extension

Square Plate

Narrow Plate

STEP 3

Adjust post assemblies to the desired height

02

01

Tighten

01

B

 

OPT

A

A

01

01

 

01

OPT

B

C

01

01

03

01

Washer
M4/M5

Bolt

M6x12mm

Bolt

#6-32 x 1 1/4

Nut 

#6-32 

Washer

#6

K

L

M

N

O

x4

x2

x2

x2

Washer

#6 x #14

P

x4

Bolt

1/4

 x13.5mm

For marble or wooden floor, rotate and 

insert the rubber pads into the holes of the 

base.

The plastic packaging bag of the posts and bases come with yellow and blue labels. ONLY assemble the 

posts and base labelled THE SAME COLOR. Otherwise it will be difficult to assemble.

Nail

Nut

Pad

Sponge

Plastic Nut

Bolt

M5x8mm

Bolt

M5X12mm

Bolt

1/4″x12mm

Bolt

M4X12mm

•Carefully open the carton, remove contents and lay out on cardboard or other protective surface to avoid damage.
•Check package contents against the Supplied Parts and Hardware List to assure that all components were 
received undamaged. Do not use damaged or defective parts.
•Not all parts and hardware included will be used. lf you require replacement parts, please contact our Technical 
Support line at 1-800-556-6806 or customer service at supportus@perlesmith.com (US)/
supportca@perlesmith.com (CA).
•Carefully read all instructions before attempting installation.
•If you do not understand the instructions or have any concerns or questions, please contact our Technical Support 
line at 1-800-556-6806 or customer service at supportus@perlesmith.com (US)/supportca@perlesmith.com (CA).
•This product may contain moving parts. Use with caution.

•Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight 

capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or 
inappropriate use.

STEP 2B-1 Secure the post assemblies [03] to the 
post extensions [02]

STEP 2B-1 Fasten the post extensions [02] and 
post assemblies [03] to bases [01]

Speaker Floor Stand

  Instruction Manual

V7.0

Model:PSSS1/PSSS1W

Thank you for choosing this PERLESMITH product! At PERLESMITH we strive to 
provide you with the best quality products and services in the industry. Should you 
have any issues, please don't hesitate to contact us at

Technical Support: 

1-800-556-6806 Mon-Fri 8am - 8pm(CST)

Other Info: 

supportus@perlesmith.com(US)

supportca@perlesmith.com(CA)

For carpets floor,screw the nails into the 

holes of the base.

Reviews: