background image

INSTALLATION ANd OPERATION INSTRUCTIONS

CUSTOm PASS-ThRU bACk bAR CAbINET — SELf CONTAINEd ANd REmOTE

Table of Contents

PreParing the Cabinet
Specifications .....................................................2,3
List of included Parts .............................................4
tools required ......................................................4
Plumbing ................................................................4
electrical ................................................................4
Uncrating and inspection .......................................4
Placing the Cabinet ...............................................4
Leveling the Cabinet ..............................................4
installing Legs  ......................................................4
installing the base Plate ........................................4
electrical Condensate evapaway Kit ....................4
refrigeration and temperature Control .................5
Cleaning the Cabinet .............................................5
Cleaning Stainless Steel .......................................5
replacement Parts ................................................6
reversing Door hinge ...........................................7
Wiring Diagram ......................................................8

8300 West good hope road  •  Milwaukee, Wi 53223  •  Phone 414-353-7060  •  Fax 414-353-7069

toll Free 800-558-5592  •  e-Mail: Perlick@Perlick.com  •  www.Perlick.com

mOdEL NOS.

 

PS Series

 

Pr Series

ImPORTANT INfORmATION

Fill  out  the  enclosed  warranty  card  and  mail  to  the 

Perlick  Corporation  to  register  the  warranty.  if  the 

card  is  not  returned,  the  warranty  period  will  begin 

from  the  date  the  equipment  is  shipped  from  the  

factory.

this manual has been prepared to assist you in the 

installation of your Cabinet and to acquaint you with 

its operation and maintenance.

We  dedicate  considerable  time  to  ensure  that  our 

products  provide  the  highest  level  of  customer  

satisfaction.  if  service  is  required,  your  dealer  can 

provide you with a list of qualified service agents. For 

your  own  protection,  never  return  merchandise  for 

credit without our approval.

We  thank  you  for  selecting  a  Perlick  product  and 

assure  you  of  our  continuing  interest  in  your 

satisfaction.

WARNING:  When  lifting,  the  full  weight  of  the 

cabinet must be supported. Lift from the cabinet 

base  and  not  from  the  top.  Improper  lifting  can 

result in severe damage to the cabinet.

PS Series 

PR Series

 

Form no. Z2279

rev 08.01.07

Summary of Contents for PR48









Reviews: