background image

MAGNIUM

GEAR

148 mm

410 mm

128x400x50 mm

140x430x75 mm

130x410 mm

275 mm

Up to 280 mm wide

CPU cooler height

GPU length

Side Radiator 

Top Radiator

Bottom Radiator

Power supply length

E-ATX Motherboard

01

INTRODUCTION

Thank you for choosing the Magnium Gear NEO 
Qube 2. This manual will walk you through the 
installation process and provides an overview of all 
the features, clearances and accessories that the 
NEO Qube 2 provides.

This manual is intended for:

- NEO | Qube 2
- NEO | Qube 2 IM

If you have any questions, suggestions or require customer 

service, please check our website www.magnium-gear.com or 

contact us through support@magnium-gear.com

Power

Reset*

*

  Becomes  power  button  for  dual-system,  see       

DUAL-SYSTEM section for more information.

D-RGB color
D-RGB mode

Headphones & Mic

USB C

USB 3.0

USER MANUAL

MODES

Press and hold the 

MODE

 button for two seconds 

to turn off LEDs, press again to turn it ON

COLORS

SOLID

BREATHING

SPARKLE

MUTLI-COLOR

TURN OFF LEDs

INCLUDED ACCESSORIES

FRONT I/O

D-RGB CONTROLS

FAN & RADIATOR SUPPORT

SIDE

TOP

BOTTOM

CLEARANCE

FANS

RADIATOR

120mm

3x

3x

3x

-

2x

2x

up to 360 mm

-

up to 360 mm

up to 280 mm

up to 360 mm

-

120mm

140mm

140mm

WWW.MAGNIUM-GEAR.COM

VERSION 1.3

33x

SSD & Motherboard 
Screw

8x

HDD Screw

6x

Zip Ties

5x

Motherboard Stand-off

4x

PSU Screw

NOTE |

 D-RGB control buttons are deactivated if connected to a motherboard.

Summary of Contents for Magnium Gear NEO Qube 2

Page 1: ... www magnium gear com or contact us through support magnium gear com Power Reset Becomes power button for dual system see DUAL SYSTEM section for more information D RGB color D RGB mode Headphones Mic USB C USB 3 0 USER MANUAL MODES Press and hold the MODE button for two seconds to turn off LEDs press again to turn it ON COLORS SOLID BREATHING SPARKLE MUTLI COLOR TURN OFF LEDs INCLUDED ACCESSORIES...

Page 2: ...his for both top panels Lift the side front panel upwards 4 before pulling it away from the chassis Both side and front panels are removed in the same way 01 02 2 1 3 4 REMOVING CHASSIS PANELS REMOVING SIDE FRONT PANELS WARNING FOR NEO QUBE 2 IM Please be careful when removing the front panel the infinity mirror coating is sensitive to fingerprints and not easy to clean ...

Page 3: ... onto the chassis and secure with 2x case screws Use the SSD screws to install the 2 5 SSD s The 3 5 HDD can be installed with the HDD screws Remove the storage bracket before installing the power supply The power supply is then secured with 4x PSU screws 03 05 04 Supported Motherboad form factors are Mini ITX Micro ATX ATX E ATX up to 280mm wide For Micro ATX Motherboards please re position the s...

Page 4: ...ng can be expanded with more lighting products using the two available connectors Additionally the lighting can be controlled from a compatible motherboard D RGB CABLES EXPAND WITH MORE D RGB PRODUCTS CONTROL LIGHTING FROM THE MOTHERBOARD MOTHERBOARD FRONT I O HEADER DIAGRAM 06 I O CABLES The PHANTEKS REVOLT X PSU is required for a Dual System Install 4x Motherboard Stand offs Secure the Mini ITX ...

Reviews: