Addendum for MiraVision Mirror TV
(Model Number: 30HM9202/30MW9002)
1
Introduction
The Mirror TV is designed to combine a decorative mirror with a LCD TV, to provide an
exciting new display experience to customers.
The Mirror is intended for decorative in-door usage only. The product is not designed for
usage in moisture rich environments like bathrooms.
The basic television functionality of the Mirror TV is covered in the by-packed TV user
guide, and in this addendum.
The electrical and LCD-TV design of the 30HM9202/30MW9002 is based on the Philips Flat
TV model number 30PF9946.
2
Selecting the right location
Due to the reflective surface, it is important to place the Mirror TV in a location where
bright reflections will not interfere with viewing of the TV. The location of light sources
should be considered before product installation.
3
Safety Precautions and Cleaning Procedures
The safety precautions and cleaning procedures for the Mirror TV are similar to that of the
30” LCD-TV, and can be referenced to the respective sections in the by-packed TV user
guide. Please refer to the User guide for more information.
However, to ensure that the Mirror TV continues to provide excellent and durable
performance, the following safety precautions are strongly advised:
1. Do not shift or move the Mirror TV when it is powered on.
2. Do not touch, push, or rub the surface of the mirror glass with any sharp or hard
objects.
3. For proper ventilation, provide at least 5 cm from the top and bottom of the Mirror
TV back panel to allow for a free flow of air.
4. Do not place the Mirror TV near a radiator or other sources of heat, or near areas
where it can be exposed to rain or excessive moisture.
5. It is also advisable not to place the Mirror TV under bright lighting or direct sunlight,
as this could adversely affect the brightness of the LCD display and the overall quality
of the picture.
Version 0.5
18 Nov 2004
