background image

Service Manual

Philips Consumer Lifestyle

Published by Philips Consumer Lifestyle 

Printed in the Netherlands 

© Copyright reserved 

Subject to modification

 Essence 

Food 

processor

HR7756/01

09/07

PRODUCT INFORMATION

-  The Foodprocessor is equipped with mechanical and 

thermal safety switches.

Materials used:

-  Bowl, bowl lid,  

:  SAN

blender jar & safety cover, lid 

-  Housing, screw cap, blender lid, pusher,  :  PP

mixing bowl, inlay bowl handle

- Panel foil 

: Santoprene

-  twin beater 

:  POM, PP,

  

stainless 

steel

-  Kneading accessory 

:  PP, chrome

  

plated 

steel

-  Tool holder bowl 

:  POM

-  Insert holder, handgrip blender jar 

:  ABS

-  Adjustable slicing disc 

:  POM, ABS,

  

stainless 

steel

Safety:

-  Automatically resettable  :  protects motor against

thermal cut out 

  overheating

-  Built – in safety lock 

:  detects wheter lid & bowl are

  

  assembled

-  Motor brake system 

:  stops the appliance within

  

1.5 

seconds

-  This product meets the requirements regarding 

interference suppression on radio and TV.

-  After the product has been repaired, it should function 

properly and has to meet the safety requirements as 
officially laid down at this moment.

TECHNICAL INFORMATION

-  Motor 

:  universal, radio / TV interference 

  

suppressed

-  Power consumption  :  800 Watt max.
-  Voltage & frequency  :  230 V, 50 Hz
-  Cordset 

:  100 cm, double insulated with 

 

  moulded on plug

-  Speed setting 

:  Smart Process Control

-  Open mixing bowl   :  4.0 L dry ingredients, 2.7 L 

liquidscapacity

-  Bowl capacity 

:  2.5 L dry ingredients, 1.7 L liquids

-  Blender capacity 

:  total jar capacity  2.0 L,

 

   

1.5 L effective

-  Metal kneading  

:  for kneading & mixing up to 2.6 kg

accessory 

  of dough, max. 1.5 kg of flour

-  Metal twin beater 

:  with double action for quicker results

-  Speeds unloaded 

:  blender drive shaft 19500 rpm (max)

 

  accessories drive shaft from 660 rpm 

 

  to 2150 rpm (high speed) depends 

  

on 

application

 

  accessories drive shaft from 180 rpm 

 

  to 520 rpm (low speed) depends on 

  

application

-  Weight in fancy box  :  6.500 g
-  Dimensions 

:  406 mm x 281 mm x 521 mm

fancy box (l x w x h)

Summary of Contents for Essence HR7756









Reviews: