background image

Service Manual

Philips Domestic Appliances and Personal Care

Published by Philips Domestic Appliances and Personal Care 

Printed in the Netherlands 

© Copyright reserved 

Subject to modification

 Specialist 

Vacuum 

cleaner

FC9108
 /A
 /B

04/02

PRODUCT INFORMATION

-  This product meets the requirements regarding 

interference suppression on radio and TV.

-  After the product has been repaired, it should function 

properly and has to meet the safety requirements as 
officially laid down at this moment.

TECHNICAL INFORMATION

- Colour 

/A

 : 

Daybreak 

purple

Version 

/B

 : 

2000 

logo

-  Maximum air displacement 

:  37 l/sec.

-  Maximum vacuum water column  :  310 cm
-  Power consumption (IEC) 230 V  :  1500 W
-  Duststorage capacity 

:  3 L

-  Type number dustbag 

:  FC8021

-  Cord length (depends on version) :  7 metres 
-  Filter system 

:  Paper dustbag

 

 

:  Exhaust AFS air filter

 

 

:  Motor inlet filter 

-  Dimensions of cleaner 

:  460 x 315 x 270 mm

-  Dimensions of packaging 

:  595 x 395 x 295 mm

-  Net weight 

:  5.88 kg

-  Gross weight 

:  9.135 kg

OPTIONAL (accessories)

- FC8021   S-bags
- FC8030 

AFS-filter

- FC8031 

HEPA Air Filter

-  FC8034 

Upgrate kit Active Carbon Filter

-  HR6988 

Turbo brush nozzle

- HR8040  Polishing nozzle

DISASSEMBLY- AND  RE-ASSEMBLY ADVISE

-  Open the appliance, first remove 

the exhaust filter grille (

item 20

), 

and then remove the 2 screws - 

C

 of the switch control panel 

(

item 15

).

-  Undo and remove the 9 screws - 

C

 in the upper housing (

item 8

). 

You will require a screwdriver 
with a 14.5 cm-long shank for 
this. Depending on the version 
screwdriver 9965 000 08332 for 
cross head or onwards 0234 
screwdriver 4322 009 08490 for T15 can be used.

-  The component configuration shown in the exploded view 

may differ in case of specific versions.  The components are  
distinguished by means of code numbers.

-  When the repair is finished, check whether all functions of 

the appliance work properly.

-  To disassemble the cord winder, use TORX screwdriver no. 

T10, which is one of a set consisting of  T20; T15; T10; T9; 
T8; T7 and T6 (code number 4822 395 50145).

C

 2x

C

 9x

Summary of Contents for FC9108








Reviews: