Philips Domestic Appliances and Personal Care
Published by Philips Domestic Appliances and Personal Care
Printed in the Netherlands
© Copyright reserved
Subject to modification
Steam Iron Mistral
GC2225
03/06
PRODUCT INFORMATION
Features
- Color : Transparent Blue
- Stainless steel soleplate
- Steam output (28 grams/min)
- Shot of Steam (60 grams/min)
- Vertical Shot of Steam
- 3 steam level
- Spray feature
- Tank capacity (250 ml)
- Cord length (1.8 m)
- 360 degrees swivel
- Integrated calc-clean feature
- Integrated cord winder feature
- Filling door
- Drip Stop feature
- Auto-Shut-Off (ASO)
Safety Information
- This product meets the requirements regarding
interference suppression on radio and TV.
- After the product has been repaired, it should function
properly and has to meet the safety requirements and
legal regulations as officially laid down at this moment.
TECHNICAL INFORMATION
Voltage
: 230 - 240 V
Frequency
: 50 - 60 Hz
Power
: 1500 - 1800 W
Dimension (F-box)
: 306 (L) x 128 (W) x 157 (H) mm
Product weight
: 1.2 kg
Water Advice
Suitable for tap water use. Advice to mix with equal portion
of distilled water or use only distilled water if the tap water is
very hard.
Stainless Steel Soleplate
The stainless steel soleplate glides smoothly & very easy to
clean. Stainless steel has a high scratch resistance and its
durability is very competitive in the market.
Shot of Steam
The shot of steam features a steam boost (60 grams/min) that
helps to remove stubborn wrinkles easily.
Vertical Shot of Steam
This features a steam boost in vertical position to remove
wrinkles in hanging garments.
Integrated Calc-clean
This ensures a longer life time of the iron and to allow the use
of normal tap water.
Drip Stop
Water is only released into steam chamber via the tank
valve when the soleplate temperature is high enough. If the
temperature is too low, the tank valve is closed by means
of a bi-metal disc. This prevents water from dripping onto
garment.
Auto-Shut-Off
The power to the heating element is cut off when the iron has
been motionless. The “Auto-Off ” pilot light starts blinking.
When the iron is moved, it is automatically switched on.
