PV panel Replacement-UrbanSpark
1.
Open the
serve hatch
2. Disconnect all
cables and take
out the controller
3. Take the
battery out
4. Remove the
fixing nuts
Pull
5.Lay down the pole carefully and put it on a soft pad
(like wood) to protect the PV panel during the whole
replacement process. Do not hit the panel with hard
objects such as stones, metal rods etc.
6. Remove the luminaire
7. Remove plastic caps
8. Remove four bolts
9. Remove the top part
The battery presents a risk of electrical shock and a high short circuit current. The Philips mounting instructions must
be strictly followed, otherwise potential application, reliability or safety issues may arise. Only a qualified Philips service
representative who is knowledgeable in product and the required precautions is permitted to replacement . Keep
unauthorized person away from the product during the replacement. The deviation from standard instructions may
causes abnormal system operations or even dangerous situations.
Note:
Whoever installs the system takes full responsibility
for safety during this process.
Spanner
Flat screwdriver
Cross screwdriver
Allen wrench
Multi-meter
Glass sucker(optional)
Tools:
1