background image

Video Cassette Recorder

Instructions for use

Safety Pr

ecaution

VR407/55
VR607/55

LPT0580-001A

   

C

C

ongratulations on purchasing your new VCR. Spare a few moments to read this instruction

manual to get better results, and to avoid any costly mistakes.

When the equipment is installed in a cabinet or a shelf, make sure that it has sufficient space on all sides
to allow for ventilation (10 cm or more on both sides, on top and at the rear.)

When discarding batteries, environmental problems must be considered and the local rules or laws
governing the disposal of these batteries must be followed strictly.

Failure to heed the following precautions may result in damage to the VCR, remote control or video
cassette.
1. DO NOT place the VCR . . .

... in an environment prone to extreme temperatures or humidity.
... in direct sunlight.
... in a dusty environment.
... in an environment where strong magnetic fields are generated.
... on a surface that is unstable or subject to vibration.

2. DO NOT block the VCR's ventilation openings or holes.

(If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able
to get out.)

3. DO NOT place heavy objects on the VCR or remote control.
4. DO NOT place anything which might spill on top of the VCR or remote control.

(If water or liquid is allowed to enter this equipment, fire or electric shock may be caused.)

5. DO NOT expose the apparatus to dripping or splashing.
6. DO NOT use this equipment in a bathroom or places with water. Also DO NOT 
place any containers

filled with water or liquids (such as cosmetics or medicines, flower vases, potted plants, cups, etc.) on
top of this unit.

7. DO NOT place any naked flame sources, such as lighted candles, on the apparatus.
8. AVOID violent shocks to the VCR during transport.

WARNING : DANGEROUS VOLTAGE INSIDE
WARNING : TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE

THIS UNIT TO RAIN OR MOISTURE.

The POWER button does not completely shut off the mains power from the unit, but
switches operating current on or off only.

The rating plate is on the rear of the unit.

Safety Pr

ecaution

 

SmartPicture

❍ 

One Touch Recording

❍ 

Child Lock

❍ 

On Screen Display

 

Automatic Operations

❍ 

Timer Recording

 

Index Search

Featur

es

PAL

407/55A5

01.10.2, 8:56 AM

1

Summary of Contents for VR 655

















Reviews: