onlinecomponents.com
© PHOENIX CONTACT - 09/2007
102526_01_en
INTERFACE
MCR-SL-D-FIT
Data Sheet
1
Description
The Standard Line digital display
MCR-SL-D-FIT
with six
displaying positions is used to display frequencies, pulses
and times. The required function can be configured quickly
and easily via the two front buttons.
Measured values can be easily read on the high-resolution
8 mm high LED display. The self-explanatory programma-
bility of the digital display offers the user enormous time-
savings.
The 24 V DC-supplied display in a 48 mm x 24 mm DIN for-
mat saves the data if the supply voltage fails. The position
of the decimal point is freely selectable. The digital display
also has a NPN transistor output that can be used, among
other things, for counting applications and is activated in the
"zero" position.
Features
–
For frequencies, pulses and times
–
Programmable
–
Data saving with Power Off
–
6 positions displayed
–
Display 48 x 24 mm
Make sure you always use the latest documentation.
It can be downloaded at
www.download.phoenixcontact.com
.
A conversion table is available on the Internet at
www.download.phoenixcontact.com/general/7000_en_00.pdf
.
Programmable Digital Display for Frequencies,
Pulses and Times
