User Manual TMicro AMT Loudspeakers
Precautions and Unpacking Procedure
Please read this user manual carefully and pay special attention to the following precautions and warnings.
______________________________________
Unpacking the Loudspeakers
In order to avoid any damage when unpacking the loud-
speakers or during the installations, you should always carry
out the work with another person. Before unpacking, remove
any jewelry and watches in order to avoid scratching the
aluminum surface. Procedure: open the carton, remove the
metal brackets on the carton carefully and lift out the
loudspeakers and protective cushions.
Important: PIEGA Loudspeakers have cabinets made from
polished aluminum. When unpacking, handle carefully all times.
Connecting the Loudspeakers
The terminal for single wiring applications is provided at the back of the loudspeakers. This is used for connecting standard loudspeaker
cables with banana plugs or with a lead.
_____________________________________ Connection
Ensure that the electronic components are switched off before
making the connection.
Important:
Ensure the poles are conneccted correctly. A
completely diffuse sound with a weak bass will be produced if
the plus and minus poles are incorrectly connected.
Pass the wires fully through the opening.
Fully insert the banana plugs up to the stop.
Daily Use
From development to production, right down to quality testing, PIEGA only uses materials and components of the highest quality. Your
new PIEGA loudspeakers are provided with a polished aluminum surface. Although this material is not very sensitive, it should be
treated with due care.
_____________________________________ Care
instructions
Clean the surfaces of the PIEGA loudspeakers with a soft, fluff-
free cloth. If necessary use a soft cloth sprayed with a little mild
window cleaner. Never use solvents to clean your PIEGA
loudspeakers. Never use abrasive detergents or any agents
with abrasive ingredients.
_____________________________________ Warnings
Do not remove the front cover. To avoid damage, take great
CONFORMS TO
care when children are close to the loudspeakers.
Don’t touch the ribbon tweeter.
UL STD. 6500
CERTIFIED
TO
CAN/CSA
STD.
E60065
PIEGA SA Bahnhofstrasse 29 CH-8810 Horgen mail@piega.ch www.piega.ch