background image

 

ORDER NO.

PIONEER CORPORATION

   

4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan

PIONEER ELECTRONICS (USA) INC.

  P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.

PIONEER EUROPE NV

  Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium

PIONEER ELECTRONICS ASIACENTRE PTE. LTD.

  253 Alexandra Road, #04-01, Singapore 159936

    PIONEER CORPORATION 2004

 

DVR-A08XLA

 

PROVISIONAL

 

DVD/CD WRITER

 

DVR-A08XLA

DVR-A08XLB

DVR-A08XLC

 

DVR-A08XLA1

DVR-A08XLB1

DVR-A08XLC1

 

THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).

 

Model

Type

Power Requirement

Remarks

 

DVR-A08XLA

KBXV

DC Power supply from other system

DVR-A08XLA1

KBXV

DC Power supply from other system

DVR-A08XLB

KBXV

DC Power supply from other system

DVR-A08XLB1

KBXV

DC Power supply from other system

DVR-A08XLC

KBXV

DC Power supply from other system

DVR-A08XLC1

KBXV

DC Power supply from other system

NECESSARY INFORMATION FOR DHHS RULES MARKED ON THE TOP COVER BELOW:
DANGER-VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.
AVOID DIRECT EXPOSURE TO BEAM.

For details, refer to "Important symbols for good services". 

 

T-ZZY SEPT.  2004 printed in Japan

Summary of Contents for DVR-A08XLA













Reviews: