background image

 

 

 

 

H

OW TO 

C

LEAN 

Y

OUR 

P

LASMA 

D

ISPLAY 

P

ANEL

 

Regular cleaning will extend the life and performance of your Pioneer plasma display panel. The 
recommended way to clean the display screen and vents is described below.  

Note: Always unplug the panel before beginning to clean the unit. 

 

Wipe the Display Screen

 

(never use harsh chemicals)

 

Vacuum the Back Vents

 

(your vent locations may vary)

 

 

C

LEANING THE 

D

ISPLAY 

S

CREEN

 

The display screen surface scratches easily. After dusting, gently wipe the screen using the 
provided cleaning cloth or a piece of soft flannel or cotton. Do NOT use a tissue, paper towel, 
rough-textured cloth, or a wet cloth. Rough textures can scratch the screen and water can seep 
under the frame edge. Also avoid rubbing or pushing on the screen. 

C

LEANING THE 

V

ENTS

 

Blocked or clogged panel vents can cause the internal temperature to increase. High 
temperatures can damage the plasma’s components, resulting in a malfunction or fire. Use a 
vacuum cleaner to remove any dust build-up from the vents.  The best practice is to clean the 
vents once a month or more often, as needed.  Set the vacuum cleaner to its weakest setting to 
avoid damaging the panel then lightly brush across the vents. 
 

Note: For cleaning the plasma chassis, do not use solvents such as benzene or thinner.  Wipe with a 

soft cloth. 

 
For additional assistance or cleaning questions, please contact your Pioneer Service 
Representative. 

Reviews: