Package Contents
● 1 x CAM-IR442V
● 1 x Quick Installation Guide
Outlook
Front panel
IR LED
SENSOR
LENS
Rear panel
1. You can use a flathead screwdriver to loose the FOCUS and
ZOOM’s outside cover screws for opening.
2. After opening the cover screws, use a crosshead screwdriver
to adjust the focus and zoom by turning the screws inside
main body.
3. Please remember to lock the cover screws back tightly; other-
wise it will be damaged and affect the water resistance.
Physical Installation
1. Make the camera on the bracket stable.
2. Connect the 75 ohm coaxial cable to device’s video input.
3. Attach the external power supply
Note
Before connect power adapter to camera, please
make sure the power output voltage is DC 12V
(max. ±10%). If you can not sure this part, we
will suggest to use a DC 12V Switching power
adapter. It can provide stably power output.
4. Adjust the camera poison and angle in different environment.
Overview
Sunshade
Power Input
Video Output
Connector Definition
Connector
Description
Power Input
Connect to a 12V DC, 1.0A power adapter.
Video Output
BNC connector for analog video output.
