english
Gherpe
in
str
uc
tio
ns
about
use
indoor
typology
table lamp
year
1968
dimension
53 x 31 x 38 [h] cm
weight
4.3 kg
materials
laser cutting and
thermoformed
Perspex
®
,
accessories in
polished stainless steel
voltage
220—240 V (EU)
110 V (USA)
60 Hz
lamp
lamp fluorescent
1 x LED A60
10W
E27
6400K
certifications
Centro Studi Poltronova
per il desi
g
n srl
via Lorenzo Bartolini 2,
50124 Firenze — Italy
www.poltronova.it
info@poltronova.it
warning
The safety of this fixture is only
guaranteed if the following
instructions have been complied with.
!
Always disconnect power before
working on fixture.
!
Fixture must not be installed in
any position other than that shown
in instructions.
!
Mount and maintain the
fixture carefully so as not to
damage components.
!
Metal surfaces, glass or other
parts of fixture may be cleaned with
a soft damp cloth and mild detergent.
!
If exposed to direct sunlight, the
materials used in this product may
show a natural chromatic variation.
!
Replacement bulbs must be of
same type and wattage as specified
in instructions.
!
Always allow the lamp to cool
before replacing it.
While the lamp is on and until it has
cooled, there is a risk of burns from
the lamp and adjacent elements.
!
Use the appliance only with the
power supply provided and at the
rated voltage specified on
the appliance.
!
The appliance may in no way
be modified or tampered with, any
modification may compromise
safety causing the appliance to
become dangerous.
!
Poltronova will not be liable
for products that are modified or
used improperly.
!
In order to prevent hazards, in the
event of damage to the appliance’s
outer cable, it may be replaced by the
manufacturer, its after sales service
or other equivalent qualified person
only following instruction given by
the manufacturer.
!
Poltronova will replace
merchandise with manufacturing
defects only if the appliance is intact
in all its parts and provided with the
original or equivalent packaging.
