What's in the box?
Decide where to place the QSX system
Mount the system with brackets (optional)
Connect power, a display, and the network
Connect a conference phone
Other mounting options
The QSX base connects to
power and networking at the table.
Cables for the computer and phone
connect to the QSX base through
a cable port in the table.
Cables from the display and phone
wall/floor module connect easily
from their installed locations.
2
3
4
Connect a SoundStation VTX 1000 conference phone
1
Setting up the
QSX
™
System
QSX 400
QSX 300
(for SoundStation
VTX 1000™)
QSX
IOIOIO
LAN
IOIOIO
LAN
IOIOIO
LAN
QSX System
Documentation Library
LAN
Make sure that the location you choose allows all of the cables
to connect easily to the QSX base. The following diagram shows
a typical installation.
The QSX default network setting is DHCP. For more information,
see the Administrator's Guide.
You may need to upgrade your SoundStation VTX 1000 software.
For version information, see the Release Notes available at
www.polycom.com/resource_center.
