PH04 Comfort XLT Grab Bar - June 2019
Page 1 of 3
PH04 Comfort XLT™
Grab Bar
Mounting Instructions
POLYJOHN
USA
PolyJohn Enterprises Corp
2500 Gaspar Ave.
Whiting, IN 46394
Phone: 800-292-1305
Fax: 219-659-0625
www.polyjohn.com
info@polyjohn.com
POLYJOHN
WORLDWIDE
PolyJohn (UK) Ltd.
Equinox 1 Audby Lane
Wetherby, England LS22 7RD
Phone: 44 (0) 1937-583333
Fax: 44 (0) 1937-583322
sales@polyjohn.co.uk
POLYJOHN
CANADA
PolyJohn Canada
P.O. Box 2300
199 Forest Plain Rd.
Orillia, Ontario LV3 6S2
Phone: 800-465-9590
Fax: 705-325-8250
info@polyjohncanada.ca
Thank you for purchasing the optional grab bar kit for the
Comfort XLT unit. The 2019 redesign of the Comfort XL
unit to incorporate a larger tank with flushing capabilites
does not require internal grab bars. Please read through
these instructions prior to installing the grab bars. If your
unit has the optional urinal installed, the left side grab bar
will not be used. If your unit has the optional sink (required
for the fresh flush option), you will be installing the shorter
PH04-0020 grab bars on the rear and right side wall.
All references to left and right will be from viewing the
unit from the front.
GENERAL OVERVIEW
~~Tools Required for Assembly~~
•
13/64” Drill Bit
• Rivet Gun w/ 3/16” nose piece
• Tape Measure
