Page 1 of 5
JUNE 2022
CAUTION
DISCONNECT FROM POWER SOURCE PRIOR TO
PERFORMING ANY MAINTENANCE OR SERVICE WORK
FWD3-1000
The Water Works
Fresh Water
Delivery System
SPECIFICATIONS
Height
60 in
152 cm
Diameter
23 in
58 cm
Tank Capacity
93 gal
352 ltr
Pump 110 volt
1.5 amp
Weight Empty
46 lb
20.87 kg
Weight Full
822 lb
372.85 kg
Flow Rate 3.8 GPM 14.4 LPM
there when you need us
General Product Overview
This self-contained fresh water delivery system is designed to attach to existing plumbing in a temporary setting such as office
trailers, portable showers, etc. and is made of tough impact resistant polyethylene. The system features an on-demand, self priming,
intermittent duty pump controlled with an adjustable time delay relay (TDR) set to run five minutes before shutting off. If the pump
runs for longer than 5 minutes, the TDR will cut power off to the pump and will have to be reset. This is done by disconnecting
the power to the unit, and then reconnecting. It also features a water fill float valve that shuts off when the tank is full, and a (GFCI)
ground fault circuit interrupter electrical plug rated at 15 amps.
Water Works™ Fresh Water Delivery System
PolyJohn’s Water Works Fresh Water Delivery System provides 93 gallons of fresh water for use in portable
showers, portable sinks, and freshwater-flush portable toilets. It’s the perfect accessory for office trailers, food
service trailers, workshops, and lunchrooms.
The Water Works has a built-in, on-demand pump that operates on regular household current, and the circuits
are protected by GFCI and a low-water electrical shut-off. Its lightweight construction (46 pounds empty) and
space-saving design (60” high by 23” wide) make it a breeze to transport and store. The tank is semi-transparent,
so it’s easy to monitor the water level. Cleaning the Water Works is simple. Water can be quickly drained through
its 1” valve, and a 10” diameter cover on the top of the tank allows easy access to the interior.
