1
2
3
4
5
Plug To Wall
Outlet
Top view
Side view
Fig. C
*Electrical Rating For The Tree
(For Indoor Use Only)
4.42A 120V, 60Hz
Fig. B
MODEL #: M-P112742
YELLOW LABEL
RED LABEL
BLUE LABEL
S
N
O
I
T
C
U
R
T
S
N
I
Y
L
B
M
E
S
S
A
A
N
I
H
C
N
I
E
D
A
M
Fig. A
1. Pull apart the legs of the stand so
that they are x-shaped.
2. When inserting the bottom section
of the tree into the assembled stand,
thread the eyebolt into the stand
and tighten until the pole is firmly
secured.
Eye Bolt
3. Each tree section is numbered with a tag. Please identify all sections before assembling.
4. Assemble the tree from the bottom to the top. Start with the bottom section and remove protective
cap before inserting into the assembled stand. Make sure the pole is firmly inserted and secured into
the stand.
5. Please remove protective cap from middle section(s) and continue inserting into the bottom section
until the tree top is inserted.
6. Allow branches to fall into place or gently pull up and out. When adjusting branches, be sure that all
wires are free of branch hinges.
7. (For pre-lit trees only) Connect the plug(s) securely to the extension cord(s) and plug the extension
cord into the wall outlet. For trees without an extension cord, connect the light strings together and
plug into the wall outlet. (See Fig. B) Your entire tree should now be lit. If some bulbs do not light or
flickers, search for any loose plugs and/or broken, loose or missing bulbs. Replace bulbs promptly in
order to maintain the performance and life expectancy of your pre-lit tree.
8. Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest from
the pole and fan out one to the right, one to the left and one at the center of the main stem. (See Fig. C)
9. After shaping the entire tree following the previous step, slightly upsweep all branch tips for a uniform
look. Shift branches to fill any gaps. Your Christmas tree is now complete and ready to be decorated.
1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2. Assemble the tree stand and place on a level surface. (See Fig. A)
Congratulations on purchasing your new tree from Polytree®. Carefully follow the instructions below on
how to quickly and easily set up your new tree.
TREE ASSEMBLY INSTRUCTIONS
