background image

ASSEMBL

Y INSTR

UCTIONS

MADE IN CHINA

Top view

Side view

Fig. C

MODEL #: TG76P4371C00, TG76P4371C01

*Electrical Rating For The Tree 

(For Indoor Use Only)
1.7A 120V 60Hz

Fig. B - Tree and Light Assembly

1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2. Assemble the tree stand and place on a level surface.  (See Fig. A)

Congratulations on purchasing your new tree from 

Polytree®!

 This tree comes with 

Quick Set® technology-Set up and light up your tree in less than 10 minutes!
Carefully follow the instructions below on how to quickly and easily set up your new tree.

TREE ASSEMBLY INSTRUCTIONS

3. Each tree section is numbered with a tag. Please identify all sections before assembling.
4. Assemble the tree from bottom to tree top. Start with the bottom section and remove the protective
    cap before inserting into the assembled stand. Make sure the pole is firmly inserted and secured into the 

stand.

5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.
6. Allow branches to fall into place or gently pull up and out. When adjusting branches, be sure that all 

wires are free of branch hinges.

7. Insert green label plug into the wall outlet.(See Fig. B ), your entire tree should now be lit. If some bulbs 

do not light or flickers, search for any loose plugs and/or broken, loose or missing bulbs. Connecting the 
plugs or replace the bad bulbs promptly in order to maintain the performance and life expectancy of 
your pre-lit tree.

8. Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest from 

the pole and fan out one to the right, one to the left and one at the center of the main stem. (See Fig. C)

9. After shaping the entire tree following the previous step, slightly upsweep all branch tips for a uniform 

look. Shift branches to fill any gaps. Your Christmas tree is now complete and ready to be decorated.

Section 3

Section 2

Section 1

Insert

Green Label

Plug Into Wall

Outlet

Do Not Tamper

Internal Parts

Open the

protective

cover

Do Not Tamper

Internal Parts

Open the

protective

cover

Fig. A - Tree Stand Assembly

Unfold the legs and lay the 

stand in a flat area. Then slide 

the locking disc downward and 

snap into place. 

Please scan code to

learn how to shape  

and set up your tree

Reviews: