background image

ASSEMBL

Y INSTR

UCTIONS

MADE IN CHINA

Top view

Side view

Fig. C

MODEL #: TV70M3X05D00

*Electrical Rating For The Tree 

(For Indoor Use Only)

Input:120VAC, 60Hz, 0.16A

Output: 29V DC 0.28A

Fig. B - Tree and Light Assembly

1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2. Assemble the tree stand and place on a level surface. (See Fig. A)

Congratulations on purchasing your new tree from 

Polytree®! 

Carefully follow the instructions below 

on how to quickly and easily set up your new tree.

TREE ASSEMBLY INSTRUCTIONS

3. Each tree section is numbered with a tag. Please identify all sections before assembling.
4. Assemble the tree from the bottom to the top. Start with the bottom section and remove protective
    cap before inserting into the assembled stand. Make sure the pole is firmly inserted and secured into
    the stand.
5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.
6. Allow branches to fall into place or gently pull up and out.When adjusting branches, be sure that all
    wires are free of branch hinges.
7. (For pre-lit trees only) Connect the light strings as per the color labels indicated in Fig. B and insert
    green label plug into the wall outlet. Your entire tree should now be lit. If some bulbs do not light or
    flickers, search for any loose plugs and/or broken, loose or missing bulbs. Replace bulbs promptly in
    order to maintain the performance and life expectancy of your pre-lit tree.
8. Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest from
     the pole and fan out one to the right, one to the left and one at the center of the main stem. (See Fig. C)

Section 3

Section 2

Section 1

Adaptor

To Be Plugged

Into Wall

Outlet

Insert Green

Label Extension 

Cord into Adaptor

Control box

Insert Red Label

Plugs Into Red

Labeled Extension Cord

Fig. A - Tree Stand Assembly

Pull apart the legs of the stand so that they 

are snapped into an x-shape, place the tree 

stand on a level surface.

     To close the stand, press the metal button 

and fold the legs together.

Click

Reviews: