background image

PLEASE CALL 1-888-755-6750 BEFORE RETURNING TO THE STORE. 

                      WWW.THEPONDBOSS.NET

 

 

 

 

Stone Lights Kit 

 

 

                                     

ITEM #L3STN

 

 

 

 
 

PACKAGE CONTENTS 

 

 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

  WARNINGS AND CAUTIONS 

WARNING 

 

To reduce the risk of electrical shock, connect only to a properly grounded, grounding-type receptacle. 

 

Do not exceed the voltage shown on the transformer. 

 

Do not submerge the transformer. 

 

To reduce the risk of fire or injury, keep lamp away from materials that may burn. 

 

Always disconnect light from the power source before beginning any maintenance or work on the light. 

 

Inspect  cord  for  damage  before  installation  and/or  maintenance.  Replace  the  entire  light/transformer 
assembly if damage is found. 

CAUTION 

 

Use a proper power source as indicated on the transformer label.   

 

Keep the cord away from high temperatures or other heat sources. 

 

Do not lift the light or the transformer by its power cord. 

 

This light assembly is not intended for use in swimming pools or hot tubs.  

 

Part 

Description 

Quantity 

Rock lights w/ sensor 

Transformer 

REMINDER 

CALL 1-888-755-6750 

BEFORE RETURNING TO STORE. 

Questions, problems, missing parts? Before returning 
to your retailer, call our customer service department at  
1-888-755-6750, 8 a.m.-6 p.m., EST, Monday-Friday, or 
email us at customercare@thepondboss.net.  Or visit our 
website www.thepondboss.net. 

 

 

Summary of Contents for L3STN

Page 1: ...age before installation and or maintenance Replace the entire light transformer assembly if damage is found CAUTION Use a proper power source as indicated on the transformer label Keep the cord away from high temperatures or other heat sources Do not lift the light or the transformer by its power cord This light assembly is not intended for use in swimming pools or hot tubs Part Description Quanti...

Page 2: ...ls required for assembly ASSEMBLY INSTRUCTIONS 1 Connect the sensor to the transformer by pushing the plug into the transformer socket until it is firmly seated Hand tighten the nut from the plug to the socket Fig 1 Fig 1 2 Place the lights in or out of the water Make sure that the transformer and sensor are NOT submerged Make sure that the light sensor faces up Fig 2 NOTE At night the lights will...

Page 3: ...check sensor Make sure the sensor faces up and is not covered by dirt or debris CARE AND MAINTENANCE Periodically your lights may require cleaning for optimal performance Cleaning should only be done with warm soapy water Be sure to use biodegradable soap The frequency of cleaning depends upon the conditions of the environment where lights are used REPLACEMENT PARTS LIST For replacement parts call...

Page 4: ... warranty is applied Warranty does not cover any costs associated with the shipping handling installation or removal of products or parts subject to this warranty For products damaged in transit a claim should be filed with the carrier Disclaimer Any oral statements made about the product by the seller the manufacturer the representatives or any other parties do not constitute warranties should no...

Reviews: