background image

PART G:

WARRANTY

1. 

 

 Proof of purchase is required prior to making any warranty claim

2. 

 

 Your ACROBAT GT pool cleaner was carefully checked before shipment. After unpacking your ACROBAT GT, if any part 

is missing please notify your dealer immediately. Please consult your owner’s installation guide for operational and 

installation queries.

3. 

 

 The manufacturer warrants the ACROBAT GT main body to be free of any defects in materials and workmanship for a 

period of 3 years from purchase date of pool cleaner.

4. 

 

 If theACROBAT GT has a defective part, please take your pool cleaner and original dated invoice to your local dealer to 

have it assessed, repaired or exchanged.

5. 

 

 Hoses are warranted for 12months against material defect, excluding abrasion, wear and tear and direct sun damage or 

chemical damage.

NOTE:  CORROSIVE WATER VOIDS WARRANTY

Poor chemical balance can aff ect the life of the ACROBAT GT, Ensure the pH is maintained at 7.2 to 7.8, Water temp should 

be between 14 to 38 degrees C. Total alkalinity between should be 120 and 180, Calcium Hardness 200-300ppm in non-

fi breglass pools and 180-250ppm in fi breglass pools. Free Chlorine should be between 2 and 3 ppm. Salt should not exceed 

a maximum of 6000ppm.
Please email sales@poolpro.com.au or fax to 1800 77 88 20 to register within 7 days of purchase.
This way if you lose your receipt, we have a copy. Make sure you also send your name, address, mobile and home contact 

numbers and date of purchase.This information is kept only by us and is not sold, leased or otherwise shared with any 

other party.

WARRANTY EXCLUDES THE FOLLOWING:

1. 

 

 Discolouration of ACROBAT GT due to water chemistry or general wear and tear.

2. 

 

 Damage to ACROBAT GT due to excess chlorine or improper water chemistry balance.

3. 

 

 Poor chemical balance as well as age can cause pool liners to become abrasive and brittle. These poor surfaces can also be 

caused by poor supporting structures therefore the owner uses the pool cleaner at their own risk and releases any and all 

claims for damage where these conditions exist.

4. 

 

 Abrasion to the hose or damage from improper use, leaving the hoses out of the pool will cause damage and invalidate 

the warranty. When the hose and ACROBAT GT are out of the pool,store out of direct sunlight.

5. 

 

 All wearing parts like the disc, foot pad and bumper wheel and swivel fl oat arm must be regularly checked and replaced 

when worn. They are not covered by the 3 year warranty. However if these item are found to be faulty upon receiving 

your ACROBAT GT or are damaged in transit please contact the store where you purchased this item.

6. 

 

 Never lift the ACROBAT GT out of the pool by the defl ector ring or fl oat arm. When the ACROBAT GT is full of 

water the strain of the water volume in the machine will damage these parts. Always remove the ACROBAT 

GT from the pool holding the main outer tube slightly below where the fi rst 

hose connects to the main outer tube.

Note:

Most problems are caused by incorrect installation, poor water 

chemistry or general wear & tear.
Please regularly check the condition of fl exi foot pad & 

36 fi nned disc. These are like the tyres on a car & need 

replacement from time to time.

www.poolpro.com.au

ACROBAT GT

ACROBAT GT

Pool Cleaner

Pool Cleaner

•  36 fi n disc and fl exible foot constructed of quality polyurethane
• Proven technology: Diaphragm driven strength & quietness
• Unique hose design for extra spring
• Three year warranty on main body
• Adjustable fl ow valve to control the ACROBAT GT travelling speed
• Easy installation – no tools required
• Suitable for all in-ground pool surfaces in good condition

We hope you enjoy your ACROBAT GT automatic pool cleaner!

Automatic Pool Cleaner

OPERATING AND

TROUBLESHOOTING GUIDE

www.poolpro.com.au

ACROBAT GT

ACROBAT GT

Summary of Contents for Acrobat GT









Reviews: